Pattex Force Mix
12 g10 pieces in stock
Product details
2-component adhesive. Epoxy glue with high final strength and filling capacity. Versatile for use on many materials both indoors and outdoors. Fully cured after approximately 24 hours. High resistance to water, oil, and solvents. Epoxy resin glue with translucent color. Contents: 1x 12 g twin syringe including 2 mixing tips. Strong epoxy resin for a wide range of repairs. For various materials and repairs, Pattex Kraft-Mix Extrem Fest is the optimal choice: The epoxy glue offers high final strength and excellent filling capacity. Additionally, the epoxy glue compensates for material unevenness, resulting in clean results. Versatile in application, the 2-component adhesive adheres to almost all materials, including porcelain, glass, metal, stone, wood, many plastics, concrete, and rubber. Thanks to its high resistance to temperatures (-30 °C to 150 °C), water, oil, and solvents, the 2K epoxy resin is suitable for repairs in both indoor and outdoor areas. For professional results, the epoxy resin dries translucent and retains its shape. To allow the twin syringe to be used twice, two mixing tips are included.
Application: Surfaces must be load-bearing and free from dirt, dust, grease, and release agents. Break off the tip of the syringe and screw the mixer onto the syringe tip. Squeeze the epoxy glue out of the syringe and apply it immediately to both bonding surfaces. Fit the parts together precisely without pressing and, if necessary, secure with a clamp, tape, or similar. Adjusting the adhesive connections is only possible within the processing time of about 1 minute. Remove excess adhesive mechanically after about 10 minutes.
type of adhesive | Two-component adhesive |
Material application | Universal |
Area of use | Inside, Outside |
Documents | Safety data sheet.pdf |
Item number | 5843212 |
Manufacturer | Pattex |
Category | Glue |
Manufacturer no. | HE PK6FS |
Release date | 8.9.2021 |
Colour | Transparent |
Exact colour description | Transparent |
Material group | Plastic |
Material | Epoxy resin |
type of adhesive | Two-component adhesive |
Heat resistant up to | 150 °C |
Additional properties | Solvent resistant, Water resistant |
processing time | 1 min |
Definitive stop | 24 h |
Material application | Universal |
Area of use | Inside, Outside |
Country of origin | Germany |
CO₂-Emission | 0.2 kg |
Climate contribution | CHF 0.11 |
Items per sales unit | 1 pcs. |
Length | 120 mm |
Width | 15 mm |
Weight | 12 g |
Length | 23.50 cm |
Width | 12.20 cm |
Height | 3.20 cm |
Weight | 58 g |
Ingredients | Epoxy resin. |
Instructions for use | Substrate pre-treatment: Moisten absorbent, porous substrates (e.g. concrete, plasterboard, untreated wood) before application (e.g. with a brush). Application: Cut open the cartridge above the thread, screw on the plastic nozzle and cut off according to the joint width. Then insert the cartridge into a cartridge gun (e.g. Metylan cartridge gun). Mask the edges of the joint with adhesive tape if necessary. Then spray the Metylan sealant bubble-free into the joint and protect the joint from water until a resilient skin has formed. the applied sealant is initially white and becomes transparent as it dries. Smooth: Moisten the applied sealant with clear water only. Remove excess sealant with a suitable tool. Remove the adhesive tape immediately and smooth if necessary (follow the instructions on the tool). Protect the joint from exposure to water (e.g. rain) until a firm skin has formed. |
GHS09 Environmentally harmful
GHS07 Health hazard- H411 Toxic to aquatic life with long-lasting effects.
- H319 Causes serious eye irritation.
- H317 May cause an allergic skin reaction.
- H315 Causes skin irritation.