Nanoxia Go Deep Silence 8 - Pro TG USB 3.1 - mATX/ATX w.ODD

With the Deep Silence 8 Pro USB 3.1, NANOIXA remains true to the clear and simple design of the Deep Silence series.

The new model no longer features a split front door, further emphasizing its simplicity. The right side panel and the front door are effectively soundproofed, while the left side panel is made of glass.

Behind the door, in addition to an effective dust filter (when used with the door open), there is an external 5.25” bay, allowing for the installation of an optical drive or other devices that require a 5.25” slot if needed.

With a width of 232 mm, CPU coolers up to a height of 180 mm can be integrated into the system.

The length of the graphics card can reach 450 mm with a case depth of 475 mm; this is made possible by omitting additional HDD trays.

The Deep Silence 8 Pro USB 3.1 features 3 modular HDD cages, each capable of holding two HDDs or SSDs, as well as two slots for 3.5” or 2.5” hard drives under the power supply cover.

On the back of the motherboard tray, two additional 2.5” drives can be installed.

The Deep Silence 8 Pro USB 3.1 offers one USB 3.1 (Type C), two USB 3.0, and two USB 2.0 ports. In addition to the headphone and microphone jacks, a reset button is also located on the top of the case.

The two pre-installed 140 mm fans in the front and one at the rear ensure adequate ventilation for the system. As with other models in the Deep Silence series, this is achieved through the side "intakes" in the front.

In addition to 8 "standard" PCI-E slots, there are also two vertically arranged slots available. A device for installing graphics cards in a vertical position is also pre-installed in the case.