Jumo 60001380

The single-pole mechanical built-in thermostat is very robust due to its galvanized steel sheet housing and can be used even under harsh conditions. The measuring system operates based on the principle of liquid expansion and can be used without issues up to a maximum allowable sensor temperature of 345 °C. The smooth round sensor made of high-quality stainless steel has a diameter of 6 mm and a sensor length of approximately 87 mm. The thermostat's capillary tube is made of copper and can be flexibly installed with a bending radius of 5 mm. The maximum allowable ambient temperature at the switch head is 80 °C. The switch head is mounted using a mounting bridge secured by two screws M3 x 22. Using a screwdriver, the desired cut-off temperature can be easily set on a scale. The temperature monitor features a high switching point accuracy of +/- 1.5% in the upper third of the scale. A significant advantage is that no additional auxiliary power is required for temperature measurement. The electrical connection is made at the flat connectors of the switch assembly, which can directly switch a maximum allowable switching power of AC 230 volts / 16 A. The thermostat has a switching differential (hysteresis) of 2.5% of the scale range and automatically switches back to the original state after falling below the cut-off temperature by this value. The temperature monitor is very versatile and is used in heating, air conditioning, and ventilation technology, as well as in the plastics industry, apparatus and furnace construction, and for temperature monitoring in laboratories and climate cabinets. The device is approved according to DIN EN 14597 and has UL and EAC certification.