Heatit Controls - Module Variateur 250W Z-Wave+ 800 ZM Dimmer

The Heatit ZM Dimmer is a flush-mounted dimmer designed for installation in European electrical wall boxes. The dimmer allows users to control light sources from the Z-Wave network and/or an external switch.

The Heatit ZM Dimmer works with most low-load LEDs and other lights without flickering.

The dimmer can be connected to two external switches, which can be used to control lights, associated devices, and scenes.

The Heatit ZM Dimmer features power measurement and provides real-time information about your energy consumption.

Features:

• Z-Wave dimmer for flush-mounted installations.
• Works in a 2- or 3-wire system.
• LED compatible in a range of 5W - 250W.
• SmartStart technology.
• Scene controller.
• Firmware update (OTA).
• Power measurement.
• Overload protection.
• Short circuit protection.
• Surge protection.
• Overheating protection.
• Two inputs for external switches.
• Adjustable minimum brightness level.
• Automatic calibration of maximum brightness level.
• On/Off function.
• Supports encryption mode S0, authenticated class S2, unauthenticated class S2.

Technical Specifications:

• Protocol: Z-Wave Plus, 868.4 MHz.
• Chip: Z-Wave 800 Chip.
• Rated voltage: 230V 50/60Hz.
• Power range: 5W - 250W.
• Energy consumption: <1 W.
• Ambient temperature: 5°C to 40°C.
• RF range: up to 50 meters (depending on the environment).
• IP class: IP21.
• Dimensions: 46 x 45 x 21 mm.
• Certifications: Z-Wave Plus V2, CE, Nemko.