Hager Switching/shutter output

Switching/Shutter actuator 20/10-fold KNX, 16A Class. Rail-mounted device with integrated bus coupler. It is used to switch independent loads or to control drives and is equipped with potential-free contacts and can be connected in multiple phases. It can switch or control roller shutter/blind drives in both up and down operations. For controlling lighting outputs, options include On/Off, time control, safety off, forced control, blocking, logic, preset, delay function, or 64 scenes. It features a toggle function for time or duration. The shutter function allows for commands to raise/lower/stop and adjust the slat angle. Percentage control of the shutter to move to a predefined position. The sun protection function can control brightness per room in conjunction with an external sensor. It includes an alarm function to control the shutter to a defined position. Safety descent while the button is pressed. 64 scene functions per channel. Logic block to control the output based on the result of a logical link. Preset, blocking function, forced control. The device converts bus information into corresponding commands. Outputs are switched via the system line from their assigned inputs. Operating hour counter per output. The device can be read out with a diagnostic tool. It features a programming button and a red programming LED, bus connection via bus terminal, switching channels via terminal blocks. No external power supply is required. It includes manual operation and LED switching status display, as well as labeling options directly on the device. Note: The device can be programmed with ETS (from version 4).