Futaba GYD470 Car Drift Gyro

Weighing only 3.7 g and with micro dimensions, the GYD470 Car Drift Gyro fits into RC vehicles of various sizes. It is used to stabilise perfect drifts with controlled drift angles, either in AVCS or Normal mode. , Using the latest MEMS sensor technology, a size of only 20.5 x 20.5 x 11 mm is achieved, , All necessary settings can be made by switch or controller on the gyro itself, no PC and setting software required. The gyro effect can optionally be adjusted via a separate channel from the transmitter., , Both connection sides are of plug-in design and can be easily adapted to the model conditions by means of different patch cables (plugs/connectors) with different lengths, Normal Gyro Mode:, In this mode the GYD470 works like a normal gyro: In case of an angle change the position is corrected via the steering servo. This mode is ideal for all non-drifting RC cars. , AVCS Mode (Active Angular Velocity Control System):, The AVCS mode was specially developed for drift cars in order to perform wild drifting manoeuvres at different speeds for as long as possible. For this purpose, the GYD470 features Heading Hold technology to provide the driver with the best possible support during drifting, , Note: Only suitable for FUTABA digital servos. Stabilisation of perfect drifts, Gyro sensitivity and mode adjustable via the remote control, Switchable: T-FHSS SR / Normal mode, Easy setup - no PC and setup software required, Support for S.BUS and S.BUS2, Only for FUTABA digital servos, Operating voltage: 4.2...8.4 V, Current: 30 mA (without steering servo), Weight: 3.7 g, Dimensions: 20.5 x 20.5 x 11 mm, Temperature range: -10...+45°C, Sensor: MEMS.