Eltako FUD61NPN-230V

Universal dimmer switch for Power Mosfet up to 300W. Automatic lamp recognition. Stand-by loss only 0.7 watts. Minimum brightness or dimming speed adjustable. With children's room, snooze and light alarm switch. Also with light scene control. Encrypted radio, bidirectional radio and repeater function can be switched on. For flush mounting. 45 mm long, 45 mm wide, 33 mm deep. Universal dimmer switch for lamps up to 300W, depending on the ventilation conditions. Dimmable energy-saving lamps (ESL) and dimmable 230V LED lamps are also dependent on the lamp electronics. Zero-crossing switching with soft on and soft off to protect the lamps. Local 230V supply, switching and control voltage. No minimum load required. The set brightness level is saved when switching off (memory). In the event of a power failure, the switching position and brightness level are saved and, if necessary, switched on when the supply voltage is restored. Automatic electronic overload protection and overtemperature switch-off. Encrypted sensors can be taught-in. Bidirectional radio and/or a repeater function can be switched on. Every status change and incoming central control telegrams are confirmed with a radio telegram. This radio telegram can be taught into other actuators such as FSR61NP-230V, the GFVS software and universal displays. The GFVS software also displays the current dimming value in %. The upper % lamp/dim speed rotary switch can be used to set either the minimum brightness (fully dimmed) or the dimming speed. During operation, the lower rotary switch determines whether automatic lamp recognition or special comfort settings are to take effect. The LED accompanies the teach-in process in accordance with the operating instructions and indicates radio control commands by flashing briefly during operation.