Eltako FTN61NP-230V Wireless actuator Staircase light delay switch flush-mounted 1 NO contact 10A/250V AC

Funkaktor stair light delay switch 230V. 1 normally closed contact, not potential-free, 10A/250V AC, incandescent lamps up to 2000 watts. Delay-off with pre-warning and permanent light via push button can be activated. Encrypted radio, bidirectional radio, and repeater function are also available. Standby loss is only 0.8 watts. Suitable for flush mounting. Dimensions: 45 mm long, 45 mm wide, 33 mm deep. Contact switching at zero crossing to protect the contacts and consumers. This radio actuator as a stair light delay switch features state-of-the-art hybrid technology: the wear-free receiving and evaluation electronics are combined with a bistable relay that switches at zero crossing. This means there is no coil loss power and no heating when switched on. After installation, a brief automatic synchronization should be awaited before connecting the switched consumer to the power supply. In addition to the radio control input via an internal antenna, this stair light delay switch can also be locally controlled with a possibly previously mounted conventional 230V control button. Glow lamp current up to 5 mA, depending on the ignition voltage of the glow lamps. After a power failure, the lighting will be turned on again if the timing has not yet expired. Starting from manufacturing week 11/14, encrypted sensors can be learned. Bidirectional radio and/or a repeater function can be activated. Every state change and received central control telegrams are confirmed with a radio telegram. This radio telegram can be learned into other actuators, the GFVS software, and universal displays. With the upper rotary switch set to LRN, up to 35 radio buttons and/or motion brightness sensors can be assigned, including one or more central control buttons. After that, the desired function of this stair light delay switch is selected.