Eltako FSR61NP-230V Radio actuator flush-mounted 1 channel 10/250V

Funkaktor pulse relay 230V. 1 normally open contact, not potential-free, 10A/250V AC, incandescent lamps up to 2000 watts, with a delay on release and a switchable pre-warning for turning off and permanent light via a button. Encrypted radio, bidirectional radio, and repeater function can be activated. Standby loss is only 0.8 watts. Designed for installation. Dimensions: 45 mm long, 45 mm wide, 33 mm deep. The switching state is maintained in the event of a power supply failure. When power is restored, it will be defined as turned off. After installation, wait for the automatic short synchronization before connecting the switched load to the power supply. In addition to the radio control input via an internal antenna, this actuator can also be locally controlled with a conventional 230V control button that may be mounted in front of it. A glow lamp current is not permitted. Encrypted sensors can be learned. Bidirectional radio and/or a repeater function can be activated. Any state change and received central control telegrams will then be confirmed with a radio telegram. This radio telegram can be learned into other actuators, the GFVS software, and universal displays. Scene control: With one of the four control signals from a button learned as a scene button with a double rocker, multiple FSR61 devices can be turned on or off as part of a scene. The upper rotary switch allows for the assignment of up to 35 radio buttons in the LRN position, including one or more central control buttons. Additionally, radio window and door contacts with the function of normally closed or normally open when the window is open, radio outdoor brightness sensors FAH, and radio motion detectors FBH can be included. Afterward, the desired function of this pulse relay is selected: ER = relay, ESV = pulse switch. The LED indicates the learning process according to the operating instructions and shows radio control commands during operation by briefly flashing.