Eltako FJ62/12-36VDC

Radio-controlled blind and shutter actuator 1+1 switch 4A/36V DC, not potential-free, for a shading element motor 12-36V DC. Standby loss is only 0.3-0.5 watts. Designed for flush mounting. Dimensions: 49x51mm, 20mm deep. The connection terminals are plug terminals for conductor cross-sections from 0.2mm² to 2.5mm². With the convenient tap technology, up to 32 radio universal switches, radio direction switches, and radio central control switches can be learned. Bidirectional radio can be activated. Supply, switching, and control voltage locally 12-36V DC. In the event of a power failure, it will be defined as switched off. In addition to the radio control input via an internal antenna, this radio actuator can also be locally controlled with a possibly previously installed conventional control switch. Either separate local control inputs for up and down as direction switches, or these two inputs can be bridged and controlled with a single switch as a universal switch. The direction change then occurs by interrupting the control. A glow lamp current is not permitted. A radio switch with the functions Up, Stop, Down, Stop can be learned as a universal switch just like the local switch, as well as a radio switch like a roller shutter double switch as a direction switch with pressing up for Up and pressing down for Down. A short tap immediately interrupts the movement. Additionally, central control switches with static priority can be learned. The static priority is only active as long as the radio switch is pressed. With a control signal, e.g., from a radio transmitter module FSM61 learned as a central control switch with switches, the switching position Up or Down and the priority are specifically activated. The priority is necessary because these control signals cannot be overridden by other control signals until the central command is lifted by the end of the control signal.