Eltako FGW14 RS485 bus gateway 30014017

Eltako Bus Gateway FGW14

Manufacturer: Eltako
Designation: Bus Gateway RS485
Type: FGW14
KNX Bus System: no
KNX Radio Bus System: no
Radio Bus System: yes
LON Bus System: no
Powernet Bus System: no
Other Bus Systems: none
Bidirectional Radio: yes
Design: Multiple Interfaces
Mounting Type: DIN Rail
Width in Division Units: 1
Demounting Protection: no
With LED Display: no
Updateable: no
Operating Voltage: 12 V
Voltage Type: DC
Power Consumption: 0.5 W
Protocol: other
Provider Dependent: no
Visualization: no
Web Server: no
Radio Interface: no
IR Interface: no
Protection Class (IP): IP20

Additional Details:
Multiple gateway. Bidirectional. Standby loss of only 0.5 watts. Rail-mounted device for installation on DIN-EN 60715 TH35 mounting rails. 1 division unit = 18 mm wide, 58 mm deep. The gateway is only 1 division unit wide but can be used multiple times: for coupling up to three FEMs, for direct connection via the RS232 interface to a PC, for connection with bus components of the older series 12, or as a bus connector for two RS485 buses of series 14. Connection to the Eltako RS485 bus. Cross-wiring of bus and power supply with a jumper. Operation in conjunction with FAM14 or FTS14KS. The hold terminal is connected to the FAM14 or FTS14KS. Radio reception modules FEM are connected in parallel to the sub-bus terminals RSA2 and RSB2 as well as the power supply terminals GND and +12V. Up to 10 button input modules FTS12EM can be connected in series to the sub-bus terminals RSA2 and RSB2, possibly in series with radio reception modules FEM. The PC connection is made by connecting to the terminals Tx and Rx. Series 12 actuators are connected to the sub-bus terminals RSA2 and RSB2. There is no hold connection here. A second series 14 bus is fed through the terminals RSA2/RSB2. The settings of the operating mode rotary switch BA are made according to the operating instructions.
EAN: 4010312313855.