Eltako Decentralized

Eltako Decentralized Actuator PL-SAM1L

Manufacturer: Eltako
Designation: Decentralized actuator with sensor input
Type: PL-SAM1L
KNX bus system: no
KNX wireless bus system: no
Wireless bus system: no
LON bus system: no
Powernet bus system: yes
Other bus systems: none
Bidirectional wireless: no
Mounting type: Flush-mounted
Local/manual operation: yes
With LED display: yes
Max. switching power: 2000 W
Max. LED switching power: 400 W
Output power: 2000 W
Suitable for C-load: yes
Max. number of switching outputs: 1
Max. switching current: 10 A
Rated current: 10 A
Rated operating voltage: 230 V
Different phases connectable: no
With bus coupling: yes
Bus module removable: no
Min. depth of device box: 25 mm
Modular expansion option: no

Eltako Decentralized Actuator PL-SAM1L: Additional details
Powerline actuator with 1 channel and sensor input. Dimensions: 53 x 43 mm, 25 mm deep, designed for installation in 58 mm switch boxes. Usable as a pulse switch or relay. 1 normally open contact, not potential-free, 10 A/250 V AC, for incandescent lamps up to 2000 watts. Sensor input 230 V. Standby loss only 0.5 watts. For control and switching at the same location. For address assignment, there are two rotary switches on the front: The left rotary switch determines the group address g with 16 alphabetical values from A to P. The right rotary switch determines the element address e with 16 numerical values from 0 to 15. Above that, there is a slide switch as a configuration switch with positions 0, 1, and 2. To the left of the rotary switches is a red LED that indicates all activities. Next to it is the reset button and to its right is a service pin. Functions according to the operating manual. The upper connection terminals are plug terminals for conductor cross-sections from 0.2 mm² to 1.5 mm².