Eltako BPB55 blister pack shading

Blister pack shading with wireless switch F2T55E and wireless actuator for shading elements and roller shutters FSB61NP-230V. Smart Home sensor and Smart Home actuator. F2T55E: Pure white glossy wireless switch with printing for single installation 80x80x15 mm or installation in the E-Design55 switch system. It generates energy for wireless telegrams even when the button is pressed, thus eliminating the need for a connection cable and preventing standby loss. The wireless switch with one rocker can send two evaluable signals: pressing the top rocker and pressing the bottom rocker. The mounting plate can be screwed onto a flat surface or attached to the wall, glass, or furniture using the included adhesive film. Above a 55 mm switch box, the existing sleeves in the box are used for screw fastening. FSB61NP-230V: Wireless actuator for shading elements and roller shutters with 1+1 normally open contacts, not potential-free, 4A/250V AC. Encrypted wireless, bidirectional wireless, and repeater function can be activated. Standby loss is only 0.8 watts. For built-in installation. 45 mm long, 45 mm wide, 33 mm deep. Supply, switching, and control voltage locally 230V. In the event of a power supply failure, it will be switched off as defined. In addition to the wireless control input via an internal antenna, this wireless actuator can also be locally controlled with a possibly previously installed conventional 230V control switch.