Dätwyler Patch cord Cat 5e, S/UTP, 3 m, Yellow

RJ45 patch cable Cat. 5/5e 100 MHz, shielded, wiring 1:1. RJ-45 - RJ-45, Cat 5e. S/UTP shielding, cable sheath: halogen-free. Length: 3 m, yellow, round, no additional features. Halogen-free, corrosiveness: EN 60754-1/-2, IEC 60754-1/-2, VDE 0482-754-1/-2. Flame retardancy: EN 60332-1-2, IEC 60332-1-2, VDE 0482-332-1-2. Smoke density: EN 61034-1/-2, IEC 61034-1/-2, VDE 0482-1034-1/-2 - applicable for FRNC/LS0H. The shielded Dätwyler patch and connection cables are equipped on both sides with an injected shielded RJ45 connector and strain relief. The cable type CU 5502 flex 4P used here has excellent shielding effectiveness due to a heavily covered copper braid and is still very flexible. Standard range: from 0.5 m to 20 m. Category 5/5e. Cat 5 cables are used for signal transmission with high data transfer rates. They are designed for operating frequencies up to 100 MHz and are suitable for Fast or Gigabit Ethernet. The designation 5e comes from a revision of the standards ISO11801 and EN50173, when they were made suitable for Gigabit Ethernet. Cat-5e cables are backward compatible with conventional Cat-5 cables and are completely sufficient for home users in most situations. Halogen-free sheath. Unlike conventional PVC cables, these cables are halogen-free: the dangerous release of halogen-containing combustion gases is thus excluded and smoke generation is minimized. Halogen-free cables are also flame-retardant and do not exhibit any dangerous ignition cord effect.