Product details
For monitoring small to medium, non-aggressive liquid quantities in pipelines with a diameter of 1 inch. The device does not require a power supply. Installation: vertically in a horizontal pipeline. A calming section of at least 5 times the pipe diameter is required before and after the paddle. Mounting/attachment is done using a G 3/8 inch union nut on a soldering socket (for soldering into a standard copper T-piece with a 1/2 inch outlet) or T-piece. Not tested for drinking water. Switching point decreasing 13.5 to 16.5 l/min, switching point increasing 17.0 to 20.5 l/min, switching difference 3.5 l/min. Accuracy +/- 15% of the set target value (switching values apply only when the flow monitor is installed in our T-piece. When using copper T-pieces, the switching values increase).