Alantec Patch-cord S

Cables are intended for cross-connections at distribution points and for subscriber connections. The cables are available in different colors on request.

Construction and electrical parameters:

• Category 6AC, class EA (600 MHz), cross-section AWG 4x2x26/7 AWG, multi-core conductors, Euro4 insulation, polyethylene.
• Twisted pairs, each pair wrapped with foil of polyester and mesh braid.
• Shielding pairs shielded with polyester foil, covered with an aluminum layer.
• Under the shielding is the earth wire made of tinned copper wire with a minimum diameter of 0.4 mm and mesh braid coating made of polyvinyl with increased oxygen index (FRPVC).
• PoE 802.3 for type 2 (PoE+).
• Color: green.

Electrical characteristics at 20 °C:

• DC loop ≤ 95 Ω/km
• Variable resistance ≤ 2 %
• Insulation resistance (500 V) *km ≥ 00 M
• Passive resistance capacitor at 800 Hz nominal: 48 nF/km
• Variable reactive capacitance ≤ 1500 pF/km
• Nominal propagation speed (NVP): 69 %
• Delay propagation nominal ≤ 535 ns/100 m
• Delay angle nominal ≤ 20 ns/100 m
• DC min. installation tester (core): 1000 V

Mechanical characteristics:

• Bending radius: 4 x outer diameter
• Max. tensile force: 80 N
• Temperature range during use: -20 °C to +75 °C
• Temperature range during installation: 0 °C to +50 °C.