I was looking for a cable with a 2.5mm jack, funny how you get different products depending on whether you put the filter on connector A or B. Goes into the same topic as the question whether there are more left or more right curves ...
0
Good morning and happy new year, I have a BluRay with pcm dts dolby digital coaxial audio out and want to connect it to my amplifier. I bought a LogiLink coaxial and Toslink adapter and would like to ask what kind of cable I should buy. Normal RCA only made noise. Many thanks George
0
0
Is there a USB C to AUX and to a USB normal for charging cable for Samsung mobiles such a 3 in 1 for Apple I have found something like that but Samsung so far not
0
Looking for adapter XLR 4-pin female to XLR 3-pin female or 4-pin female to XLR 4-pin female. Who has or knows where?
7
I need an extended optical cable for my PC speakers. Is there a standard for optical cables, i.e. do all cables work for all devices, or are there differences?
1
Hello, is there an adapter that allows me to connect two headsets (4pin 3.5 mm) to one headset input (4pin 3.5 mm)?
2
I am looking for a Ground Loop Noise Isolator, (3.5mm - 3.5mm) which would remove the annoying buzz. However, I could not find a similar item in Switzerland. The point is that I would like to connect my Nintendo Switch Audio to my PC via an in-line plug, which is also possible, but this buzzing which is probably triggered by the Switch is simply unbearable. If anyone could help me, I would be very grateful.
6
Hello dear community I bought the Logitech Pro X a few days ago. https://bit.ly/3hO1JIf Unfortunately, the length of the audio cable is not enough. I have already bought a cable here https://bit.ly/3oA6Ehs. Unfortunately, the microphone signal is not transmitted with the cable. Can anyone recommend a cable? Or tell me what I should look out for?
2
Our kids really enjoy the POs (3.5 jack) from Teenage Engineering, which are connected to a JBL Flip (3.5 jack) or the amplifier (chinch). Unfortunately, this is accompanied by a lot of cable wear. Well, two 08/15 cables are broken, cable breakage near the plug. Which cables can you recommend so that we can enjoy them for a long time? Proel? ... thank you!
1
Hello all I am looking for a 3m long cable 3.5mm blade . 2x Cinch, but where the part of the jack is not long, but the two parts of the Cinch are approx. 3m long. Is there such a thing here?
0
Hello. Since Bayerdynamic does not deliver to Switzerland, I wanted to ask if you have a solution. I need a new connection cable from the headset to the PC. Thank you very much for your help.
2
Hi I am looking for a cable to connect my PC to a KVM switch. Both have a jack for 3.5mm mic and headphones. I.e. I should have a cable with 2x 3.5mm jacks on both sides. Unfortunately, I have not found such a cable and using 2x adapters seems a bit excessive to me, as I actually want to connect 2x exactly the same connections with each other. Many thanks for the help Rico
1
Hello together In our new house, I have planned to bring the speaker cables etc. to the AV via a flush-mounted box and pipes. Unfortunately, I made a mistake in thinking that I should also bring the cinch cable from the subwoofer to the AV and this in an M20 pipe. So with the plug on it = impossible. So my question is, which cable or which connector can you recommend? I would cut off one side of my existing cinch cable and then try to attach the new plug. Greetings
2
Does anyone happen to know if it is possible to connect the Rode Lavalier to a 3.5mm jack connector on a mixing console using a 3.5mm jack adapter? Or does it make more sense to go from 3.5mm jack to RCA or XLR?
4
I have an iRig Mic Lav (3.5mm, TRRS connector) for which I am looking for an extension cable (2-5m). I tried this cable: Cordial CFS WY - Jack Extension (5m, Midrange, Black) unfortunately without success. Does anyone have a suggestion?
2
Hello Together I am looking for a splitter for my headphones/headset. It/they have a 4-pin connector. I would like to connect the 4-pin cable to my PC, but it only has separate headphone and microphone connections. Can you suggest one for me?
2
Does Digitec have a jack cable with 3.5mm to 2.5mm (both male)? Couldn't find one so far... My cable for the AKG Y50 headphones has come off and I am looking for a replacement.
3
Dear Digitec employees, Would it be possible to include the Tritonaudio FetHead in the range? LG Highfly
4
Since my headphone cable is defective, I am looking for a replacement cable 3.5mm male 2x2.5mm male.
5
Hi zäme, as a hobby DJ I have a gig soon in a small club that has speakers with XLR connections. They don't have a mixer themselves and I'm bringing my DJ controller myself, which unfortunately only knows RCA and doesn't know XLR. Now I have the question of whether I should buy an adapter for XLR and RCA, or rather a small mixer? Which is better suited for a small club without a super hi-fi system? Thanks for your help!
1
2
I would like to add the possibility of a manual jack input to my speakers in the living room, what would be the best option?
5
Hello, is there an adapter with which I can connect my jeadset with two plugs to my smartphone?
1
Hello dear Digitec Community I am looking for a cable with 2x 3.5 mm jack mono to 3.5 mm jack stereo. However, I have only found 2x 6.3 mm jack mono to 3.5 mm jack stereo or 2x 6.3 mm jack mono to 6.3 mm jack stereo. Do such cables exist at all? I would be very pleased to receive an answer
1
If you select audio cable for digital plus RCA in the filter, does that only give cables with 75 ohms (characteristic impedance)? For S/PDIF electrical? https://de.wikipedia.org/wiki...
2
Need a digital audio cable, following connection: Toslink - 3.5mm jack Haven't found anything suitable... Can anyone help me?
4
Hello, I am looking for an adapter cable from 3.5 mm jack / cinch plug to 5 pin DIN plug. Is there something like this at Digitec? I can't find it. Thanks for the help! Greetings, Ronald
2
I have a mixing console with unbalanced outputs (6.3mm Kline) and two studio monitors, each with a balanced input (XLR) and an unbalanced input (6.3mm jack). Do I now need stereo line to XLR (balanced) or mono line to XLR (unbalanced)? Or do I have to use the unbalanced jack socket on the loudspeaker if my mixing console has no balanced outputs?
1
Can I connect an XBox One X to this system? Logitech Speaker System Z906 (5.1 Channel) If so, which cable do I need? The XBox One X has only one S/PDIF connector. I have no idea about audio cables and connections.
2
30 of 31 threads
