Question about Furber Nuvola

Good day
I use the device on my terrace and it works well. The connection hose is not very long but it works.
The outer part has 4 rubber feet. The inner part does not have feet directly, but can be placed on the floor without any problems.
The airflow direction is also correct. This can swivel up and down with a function.
For a video in the living area, the manufacturer's video is recommended. Simply search for Qlima MS-AC 5001.

The indoor unit measures 455*175*326 and the outdoor unit measures 460*212*363 millimetres.
Total weight 20 kg,
Capacity 5000 BTU/h / 1460 W/h,

You can place both units on a floor or other flat surface without problems, the piping is flexible enough to go around a door or window but you lose a bit of reach. In my case the indoor unit is actually 10cm lower than the outdoor compressor but are only approx 25cm apart. I added rubber feet stickers to the indoor unit but it is not obligatory. The compressor sucks air from the front (facing outside) and blows hot air out the side. The indoor unit sucks in air from the bottom half and blows it back out from the top half (both on the front facing indoors). Because there is no big air hose between the two halves and just the thin tubing for coolant it was easier for me to keep the room insulated.

Good day
No, the unit is not designed for this purpose. The connection hose is only approx. 40 cm long. Rubber feet are not supplied.
I am not sure about the airflow direction.