Question about Pioneer VSX-LX305

10 months ago

Hi, I have a 5.1.2 system, each speaker is 130w and 6ohm, so I imagine this amp is suitable? And if I take it and I want to go to 7.1.2 (so add 2) do the additional speakers have to be 6ohm and about 130w? or would 4ohm speakers be ok for example?

digitec

10 months ago

The Pioneer VSX-LX305 AV receiver is suitable for your current 5.1.2 system, especialmente given its specifications:

- It offers 100 watts per channel with 2 powered channels (8 ohms, 20 Hz-20 kHz, THD 0.08 %).
- For 6 ohm speakers and 130 watts, the receiver should be able to power them, although the maximum power per channel is slightly less than 130 watts.

If you want to upgrade to a 7.1.2 system by adding two more speakers, here are some considerations:

- The additional speakers must be compatible with the power and impedance that the receiver can handle. Speakers rated at 6 ohms and around 130 watts will be appropriate, as they match the receiver's power supply specifications.
- 4 ohm speakers may be more demanding in terms of power and could potentially overload the amplifier, especially if used at full power. It is generally recommended to use speakers of 6 ohms or more to avoid overloading the amplifier.

In summary, for a 7.1.2 system, it is best to use 6 ohm speakers and around 130 watts to ensure optimum compatibility with the Pioneer VSX-LX305 AV receiver.

Automatically generated from the .

Search

Question about Pioneer VSX-LX305

Hi, I have a 5.1.2 system, each speaker is 130w and 6ohm, so I imagine this amp is suitable? And if I take it and I want to go to 7.1.2 (so add 2) do the additional speakers have to be 6ohm and about 130w? or would 4ohm speakers be ok for example?

Offers

Related categories

Related articles

«Bibi Blocksberg – Das grosse Hexentreffen»