For Fiber 7 customers with 10GB Point to Point.

Order the SPF+ module incl. the fibre optic cable from Init 7.

Then do the basic setup (Quick Setup Guide)

Unfortunately, the 10GB LAN port is configured as WAN and the SPF+ as LAN, which is unfavourable in this case. We have to reverse this.

To do this, we need to activate remote access under Settings = System settings in the ASUS Router app. Unfortunately, this requires the Internet, which the router does not yet have at this point. The app explains how you can use your smartphone. Under Android via USB tethering.

You should now have internet on the router, even if only on your smartphone. Now activate the remote access

http://192.168.50.1/Advanced_WANPort_Content.asp

Enable Dual WAN: off
Primary WAN: 10G SFP+

Apply and now you should have fun ;-)

Question

For Fiber 7 customers with 10GB Point to Point.

Order the SPF+ module incl. the fibre optic cable from Init 7.

Then do the basic setup (Quick Setup Guide)

Unfortunately, the 10GB LAN port is configured as WAN and the SPF+ as LAN, which is unfavourable in this case. We have to reverse this.

To do this, we need to activate remote access under Settings => System settings in the ASUS Router app. Unfortunately, this requires the Internet, which the router does not yet have at this point. The app explains how you can use your smartphone. Under Android via USB tethering.

You should now have internet on the router, even if only on your smartphone. Now activate the remote access

http://192.168.50.1/Advanced_WANPort_Content.asp

Enable Dual WAN: off
Primary WAN: 10G SFP+

Apply and now you should have fun ;-)

Accepted Answer

Thank you very much for your feedback! I'm sure that some Community members can benefit from it.🫡

Answer

Thank you very much. At first I stupidly entered the https: address up to Apply and thanks to ChtGpt it realised that it was only the beginning and that I simply had to switch off Dual WAN and select the 10 SFP+. I was used to something different with the ax89x. But now it works, thank you

Answer

Thanks for the instructions, but when I activate Remote Access, it simply tells me to connect to Google and Co. and when I enter your command in the iPhone browser, the main page of the router simply opens. I'm a bit frustrated

Answer

@dominik.zogg
why so complicated?
connect device (lan or wifi), open webinterface and configure sfp+ as wanport? or am i missing something?

Search

Settings

Customer account

Comparison lists

Watch lists

Cart

Question about ASUS WL-Router RT-BE88U