Best selling Weather station accessories from somfy

On this page you'll find a ranking of the best somfy products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.

1. somfy Eolis WireFree io

Wind automation: The Eolis WireFree io continuously measures the current wind speed. If the set threshold for wind is exceeded, the awning or blind will be lowered or raised for protection. If the set threshold is not met, an additionally installed sun automation will be released again after 12 minutes. 

2. somfy Rain sensor 9016345 Ondeis

The capacitive sensor measures types of precipitation such as rain and snow and is compatible with all control units that have an input for potential-free sensors. This allows for easy integration into existing systems. A supplied mounting bracket enables simple wall or pole installation. Additionally, the sensor cable and the power supply connection cable are easy to install. The sensor is resistant to contamination, achieved through a film that protects the circuit paths from oxidation. It responds quickly and accurately to precipitation and features a self-regulating heater that prevents the accumulation of snow or ice, ensuring functionality at low temperatures. The sensor's housing is not only visually appealing, compact, and UV-stable, but also protected against splashes according to protection class IP 44. The technical specifications state that the sensor operates with a supply voltage of 100-230 AC at a frequency of 50-60 Hz and is designed for a temperature range of -20 to 60 degrees Celsius. It falls under protection class II and has a potential-free switching contact that can operate at a minimum of 30 mA DC or 230 AC and a maximum of 30 A DC or 230 AC. With a maximum heating power of under watts and dimensions of 115 x 85 x 100 mm (width x height x depth), the sensor is ideally suited for weather monitoring across a wide range of applications. 

3. somfy Eolis io

The sensor enables automatic control of one or more io drives or io receivers via radio, depending on wind and rain conditions. When the set wind threshold is exceeded, the awning is retracted for protection. After approximately 30 seconds or 12 minutes, further manual or automatic commands are released. It features an integrated rain automation system in conjunction with the Ondeis 230V rain sensor (not included). Wind threshold values can be set in 6 levels from 28 km/h to 88 km/h. The behavior of the integrated rain automation can be adjusted via a switch - the wind automation brings the io-motorized applications to a safety position in strong winds. Operating voltage: 230 V - 50 Hz. Operating temperature: -20 to 50 degrees Celsius. Protection class: IP 34. Protection type: II. Radio frequency: 868-870 MHz. Wind setting range: 28-88 km/h; no cable is included in the delivery. 

4. somfy 1818317 Soliris Smoove Uno Pure White Kit w.W/S Sensor o.Frame

The motor control unit allows for both automatic control based on time, wind, and brightness, as well as manual control for the wired operation of roller shutters, awnings, pergolas, and screens. It features a large, backlit display and enables intuitive operation thanks to a full-text menu display. Wind speed and sunlight intensity are measured by a combined wind and sun sensor, with the wind and brightness thresholds easily adjustable directly on the control unit. It is possible to combine the device with a standard room thermostat to utilize solar energy for heating during the cold season. Additionally, it can be paired with a rain sensor to protect the awning fabric and mechanism. Users can choose between a wireless sun sensor or a wired sensor. Dusk automation can be implemented either through preset sun path times or via the wireless sun sensor. The package includes the motor control unit with time, wind, and sun automation, including the wind-sun sensor. The frame must be ordered separately.

The technical specifications of the device include an operating voltage of 220-240 V, 50/60 Hz, a relay with a switching contact load capacity of 3 A cos phi 0.9, an operating temperature of up to 40 degrees Celsius, designed for dry living spaces, protection class IP20, protection class II, and a maximum drive runtime of minutes. The device measures 50 x 50 x 22 mm. This item is the successor to Soliris Uno, SM 2000-1, SM 2010-1. 

5. somfy Wind sensor

The essential wind protection for a patio awning with articulated arms. Automatic, wind-load-dependent control of an articulated arm awning drive via radio. The Eolis 3D WireFree io continuously measures the vibrations caused by the wind on the awning. If the set threshold is exceeded, the awning retracts for protection. In this state, any manually given movement command and any automatic movement command are blocked. Once the set threshold is no longer exceeded, an additionally installed sun automation is released after 30 minutes. Manual operation is possible again after just 30 seconds. 

6. somfy Eolis

Funk wind sensor Eolis 3D WireFree io in white, battery-operated, for the automatic (wind load-dependent) control of a folding arm awning drive via radio. The Eolis 3D WireFree io continuously measures the vibrations occurring at the awning due to wind. If the set threshold is exceeded, the awning retracts for protection. In this state, all manually given commands and all automatic commands are locked. If the set threshold is not reached, an additionally installed sun automation will be released again after 30 minutes. Manual operation is possible again after just 30 seconds. 

7. somfy 9001608

The Somfy Weather Station Mounting Material 9001608 is a high-quality wind sensor specifically designed for use with blinds and other automated systems. With a height of 190 mm and an IP54 protection rating, this sensor is robust and suitable for outdoor use. It can measure wind speeds of up to 30 m/s, making it ideal for various weather conditions. The sensor is powered by mains electricity, providing reliable performance to ensure the safety and efficiency of your automated systems. Manufactured in the Netherlands, the product reflects the manufacturer's commitment to sustainability, as it meets the standards of the Science Based Targets Initiative (SBTi). The use of plastic as a material ensures durability and resistance to weather conditions.

- IP54 protection rating for outdoor use
- Measures wind speeds up to 30 m/s
- Mains powered for reliable performance
- Manufactured in the Netherlands with a commitment to sustainability. 

8. somfy 1870932 KNX Weather Station

The 1870932 KNX weather station from Somfy is an advanced sun protection control unit that allows precise management of up to eight facade areas. It is equipped with a variety of sensors that collect important weather data such as brightness, wind speed, rain, and temperature. This weather station offers quick and easy installation, supported by a compact design that allows for discreet mounting on roofs or facades. The integrated KNX bus coupling unit and GPS/GLONASS receiver ensure automated positioning and efficient energy optimization. With an automatic sun protection algorithm and twilight control, the weather station dynamically adapts to environmental conditions to maximize comfort.

- Advanced control for up to 8 facade areas
- Integrated sensors for comprehensive weather data
- Automatic sun protection algorithm for comfort control
- Energy optimization through measurement of global solar radiation
- Quick installation with mounting arm and cable outlet. 

9. somfy 9027035 Kit mast adapter

Somfy 9027035 Kit mast adapter.

10. somfy Soliris

Somfy Soliris sensor 1818212

Manufacturer: Somfy
Designation: Soliris Sensor RTS LED 5 m
Type: 1818212
Radio frequency: 433.42 MHz
Rolling code system: yes
Range: 20 m
Number of commands: 4
With radio hand-held transmitter: no
Flush-mounted radio push-button: no
Wireless push-button on plaster: no
With radio coding device: no
Protection class (IP): IP34
Keypad protective cover: no
Power supply: 230 V AC

Somfy Soliris Sensor 1818212: further details
Sensor for automatic wind and brightness-dependent control of one or more RTS drives or RTS receivers by radio. If the set threshold value for wind is exceeded, the blind is raised or retracted for protection. If the light intensity persistently exceeds the set threshold value, the blind automatically moves to the sun protection position.
EAN: 3660849512873. 

See all products