Best Allied Telesis products in the Transceivers category

On this page you'll find a ranking of the best Allied Telesis products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.

1. Allied Telesis QSFP28-SR4 Network Transceiver Module Fiber Optics 850 nm

Quad small form-factor pluggable modules

The Allied Telesis QSFP28 Series offers the latest industry-standard connectivity in a flexible, small form factor. These
hot-swappable transceiver modules simply plug into any compatible Allied Telesis product.

Options

Allied Telesis QSFP28 Series 100 Gigabit Quad Small Form-Factor Pluggables (QSFPs) are supported on all Allied Telesis devices with QSFP28 uplink connections.

The QSFP28 is hot-swappable to allow for network changes without removal or reconfiguration of costly network equipment.

Applications

The QSFP28 Series supports 100GbE interconnects. They are ideal for Datacom/Telecom switch and router connections, as well as data aggregation, backplane, proprietary protocol and high-density applications.

Interoperability

The Allied Telesis QSFP28 is fully compliant with industry-standard networking regulations so it may be used on any networking equipment which complies with industry standards.
 

Allied Telesis QSFP28-SR4 Network Transceiver Module Fiber Optics 850 nm
Transceivers
CHF2477.95

Allied Telesis QSFP28-SR4 Network Transceiver Module Fiber Optics 850 nm

2. Allied Telesis AT-QSFP28-1CU Serial Attached SCSI (SAS) Cable

100 Gigabit passive small form-factor cables

Allied Telesis QSFP28 small form-factor direct attach cables are suitable for in-rack connections between QSFP28 ports
on all QSFP28 compatible products. They are ideal for short distances and provide cost-effective connectivity within a rack or in racks within close proximity of each other.

Point to point cables

Allied Telesis QSFP28 direct attach cables are point to point, providing a simple and cost-effective solution for connecting two QSFP28 ports and delivering high-speed 100 Gbps connectivity.

The cables are terminated at each end with QSFP28 connectors, allowing hot-swappable direct connection to all Allied Telesis products that support QSFP28 ports.

Cables are available in 1 m and 3 m lengths.

The cables are compliant with the standards MSA, SFF-8665, and SFF-8661, ensuring interoperability with other compliant products.

Interoperability

The Allied Telesis QSFP28 Series is fully compliant with industry-standard networking regulations. This allows Allied Telesis QSFP28 modules to be used on any networking equipment that complies with industry standards.
 

Allied Telesis AT-QSFP28-1CU Serial Attached SCSI (SAS) Cable
Transceivers
CHF333.95

Allied Telesis AT-QSFP28-1CU Serial Attached SCSI (SAS) Cable

3. Allied Telesis QSFP+/LC SR4 MULTI-MODE (150M)

The QSFP+/LC SR4 Multi-Mode (150m) transceiver from Allied Telesis is a high-performance solution for data transmission in modern networks. With a maximum data transfer rate of 40 Gbit/s and a range of up to 150 meters, this module is ideal for applications that require a fast and reliable connection. The transceiver utilizes multi-mode fiber technology and features an LC optical connector, allowing for easy integration into existing systems. The wavelength of 850 nm ensures efficient signal transmission, while the QSFP+ interface provides high flexibility and compatibility with various network devices. This product is particularly suitable for data centers and enterprise networks that demand high bandwidth and low latency.

- Maximum data transfer rate of 40 Gbit/s
- Supports multi-mode fiber (MMF)
- Optical cable connector: LC, QSFP+
- Maximum transmission distance of 150 m
- Wavelength of 850 nm.
 

Allied Telesis QSFP+/LC SR4 MULTI-MODE (150M)
Transceivers
CHF1251.95

Allied Telesis QSFP+/LC SR4 MULTI-MODE (150M)

4. Allied Telesis SFP+ 300M

The Allied Telesis AT SP10SR/I is an SFP+ transceiver module designed for data transmission at speeds of up to 10 Gbps. This module utilizes 10GBase-SR technology and is optimized for use in multi-mode fiber networks. With a maximum transmission range of 300 meters at a wavelength of 850 nm, this module is ideal for applications in data centers and enterprise networks where high bandwidth and short distances are required. The module's form factor is designed as a plug-in module, allowing for easy integration into existing systems. Additionally, the transceiver supports Digital Diagnostics Monitoring (DDM), enabling precise monitoring of operational parameters. The AT SP10SR/I is compatible with a variety of network devices and meets RoHS and MSA certification requirements.

- Supports data transmission rates of up to 10 Gbps
- Maximum transmission range of 300 m
- Compatible with multi-mode fiber networks
- Integrated Digital Diagnostics Monitoring (DDM).
 

5. Allied Telesis AT-QSFPSR4 Network Transceiver Module Fiber Optic QSFP+ 850 nm

Allied Telesis QSFP series pluggable optical modules offer the latest industry-standard 40 Gigabit Ethernet connectivity in a flexible, small form factor. These hot-swappable transceiver modules simply plug into any compatible Allied Telesis product. 

Allied Telesis AT-QSFPSR4 Network Transceiver Module Fiber Optic QSFP+ 850 nm
Transceivers
CHF1161.95

Allied Telesis AT-QSFPSR4 Network Transceiver Module Fiber Optic QSFP+ 850 nm

6. Allied Telesis AT-SPEX/E network transceiver module fiber optics SFP

Gigabit small form-factor pluggable modules

The Allied Telesis SP Series delivers flexible, full-duplex Ethernet connectivity. These hot-swappable fiber and copper
interfaces simply plug into the SFP slot on all SFP-compatible devices. Configuration can be optimized to meet a wide variety of distance and service requirements.

Compatibility

Allied Telesis SP Series small form-factor pluggables (SFPs) are supported on Allied Telesis devices with SFP uplink connections. SP Series SFPs are Multi-Sourcing Agreement (MSA)-compliant and fully adhere to industry standard networking regulations. This allows the SP Series to be used with other MSA-compliant platforms that support SFP uplink connections.

Options

SP Series SFPs offer short-haul, long-haul, and bi-directional (BiDi) solutions. This flexibility allows network managers to easily extend network distance and bandwidth. Using an SFP BiDi transceiver can upgrade transmission capacity on a typical network—without installing new fibers—by utilizing a single fiber for both the send and receive signals.

Multiple temperature ranges

Different network environments call for a variety of temperature ranges. The SP Series is available in standard (0-70°C), industrial (-40 to 85°C), and extended (-40 to 105°C) temperature variants.
 

Allied Telesis AT-SPEX/E network transceiver module fiber optics SFP
Transceivers
CHF176.95

Allied Telesis AT-SPEX/E network transceiver module fiber optics SFP

7. Allied Telesis AT SPSX - SFP (mini-GBI

The AT SPSX - SFP (mini-GBI) from Allied Telesis is a high-quality transceiver designed for use in network infrastructures. This SFP-type module provides an SFP+ interface that enables reliable and efficient data transmission. With a range of up to 550 meters, this transceiver is ideal for applications requiring high bandwidth and fast data transfer rates. Made in Japan, the AT SPSX ensures high quality and durability. The use of SFP modules allows for a flexible network architecture, as they can be easily integrated into existing systems. This transceiver is an excellent choice for companies looking to expand or upgrade their network capabilities without compromising performance. With its compact design and ease of use, the AT SPSX is a practical solution for modern networking needs. 

8. Allied Telesis 10KM 1310NM 1000BASE-LX SMALL

Gigabit small form-factor pluggable modules

The Allied Telesis SP Series delivers flexible, full-duplex Ethernet connectivity. These hot-swappable fiber interfaces
simply plug into the SFP slot on all SFP-compatible devices. Configuration can be optimized to meet a wide variety of distance and service requirements. 

Allied Telesis 10KM 1310NM 1000BASE-LX SMALL
Transceivers
CHF211.–

Allied Telesis 10KM 1310NM 1000BASE-LX SMALL

9. Allied Telesis AT-SP10LR 10KM 1310NM 10G

SFP+ Pluggable Optical Module, 10G-LR, 10km, Single mode, Dual fiber [Tx=1310,Rx=1310], LC conn. (0 to 70°C).

Allied Telesis AT-SP10LR 10KM 1310NM 10G
Transceivers
CHF629.–

Allied Telesis AT-SP10LR 10KM 1310NM 10G

10. Allied Telesis AT SPLX40/E

1000EX (LC) single-mode SFP, Ext-Temp, 40km

The SPLX40/E offers a long-haul option to extend your network up to 40 km.

Gigabit small form-factor pluggable modules

The
Allied Telesis SP Series delivers flexible, full-duplex Ethernet connectivity. These hot-swappable fiber and copper interfaces simply plug into the SFP slot on all SFP-compatible devices. Configuration can be optimized to meet a wide variety of distance and service requirements.

Compatibility

Allied Telesis SP Series small form-factor pluggables (SFPs) are supported on Allied Telesis devices with SFP uplink connections.

SP Series SFPs are Multi-Sourcing Agreement (MSA)-compliant and fully adhere to industry standard networking regulations. This allows the SP Series to be used with other MSA-compliant platforms that support SFP uplink connections.

For Cisco compatibility, please refer to the SFP compatibility flyer.

Options

SP Series SFPs offer short-haul, long-haul, and bi-directional (BiDi) solutions. This flexibility allows network managers to easily extend network distance and bandwidth.

Using an SFP BiDi transceiver can upgrade transmission capacity on a typical network—without installing new fibers—by utilizing a single fiber for both the send and receive signals.

Multiple temperature ranges

Different network environments call for a variety of temperature ranges. The SP Series is available in standard (0-70°C), industrial (-40 to 85°C), and extended (-40 to 105°C) temperature variants.