Best selling PoE injectors from Moxa

1. Moxa INJ-24A-T - Gigabit high-power PoE injector, max. output of 36W60W at 24 or 48 VDC by 2-pair

Gigabit high-power PoE+ injector with a maximum power of 36W/60W at 24 or 48 VDC in 2-pair/4-pair mode, operating temperature range of -40 to 75°C.

Ethernet interface:
- 10/100/1000BaseT(X) ports (RJ45 connection): 1
- Full/Half duplex mode
- Auto MDI/MDI-X connection
- Auto negotiation speed

PoE ports (10/100/1000BaseT(X), RJ45 connection): 1
- Full/Half duplex mode
- Auto MDI/MDI-X connection
- Auto negotiation speed

PoE pinout:
- Standard: V+, V+, V-, V- for pins 4, 5, 7, 8 (Midspan, MDI, Mode B)
- Custom DIP switch setting: V+, V+, V-, V- for pins 1, 2, 3, 6 (Endspan, MDI, Mode A)

Standards:
- IEEE 802.3 for 10BaseT
- IEEE 802.3ab for 1000BaseT(X)
- IEEE 802.3af/at for PoE/PoE+ output
- IEEE 802.3u for 100BaseT(X)

Performance parameters:
- Input voltage: 24/48 VDC
- Operating voltage: 22 to 57 VDC
- Input current: 2.71 A @ 24 VDC
- Power consumption (Max.): 5.29 W at full load without the consumption of the PDs
- Power budget: Max. 60 W for the entire PD consumption; Max. 60 W for each PoE port
- Connection: 1 detachable 4-contact terminal block
- Overload protection: Supports
- Reverse polarity protection: Supports

Physical features:
- Housing: Metal
- IP protection class: IP30
- Dimensions: 30 x 115 x 78.8 mm (1.19 x 4.53 x 3.10 in)
- Weight: 245 g (0.54 lb)
- Installation: DIN rail mounting; Wall mounting (with optional kit)

Ambient conditions:
- Operating temperature: -40 to 75°C (-40 to 167°F)
- Storage temperature (including packaging): -40 to 85°C (-40 to 185°F)
- Relative humidity: 5 to 95% (non-condensing)

Standards and certifications:
- Safety: UL 508, EN 62368-1
- EMC: EN 55032/24
- EMI: CISPR 32, FCC Part 15B Class A
- EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV; IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m; IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV; IEC 61000-4-5 Surge: Power: 3 kV; Signal: 3 kV; IEC 61000-4-6 CS: 10 V; IEC 61000-4-8 PFMF
- Free fall: IEC 60068-2-31
- Shock: IEC... more

PoE injector

CHF489.–

Moxa INJ-24A-T - Gigabit high-power PoE injector, max. output of 36W60W at 24 or 48 VDC by 2-pair

802.3af (PoE), 60 W

2. Moxa INJ-24-T - PoE injector, maximum output of 30 W at 2448 VDC

The Moxa INJ-24-T PoE injector is a powerful solution for simultaneously transmitting power and data over a single Ethernet cable. This active PoE injector allows non-PoE devices to be powered by providing a maximum output of 30 W at 24/48 VDC. With an operating temperature range of -40 to 75 °C, it is suitable for use in demanding environments. The INJ-24-T features an Ethernet interface with an RJ45 connector that operates in both full and half-duplex modes. Automatic speed negotiation and support for Auto-MDI/MDI-X connections ensure easy integration into existing networks. The injector is also equipped with overload and reverse polarity protection, enhancing the safety and reliability of the power supply.

- Operating temperature range of -40 to 75 °C for demanding environments
- Supports PoE standards IEEE 802.3af/at for maximum compatibility
- Automatic speed negotiation for easy network integration
- Overload and reverse polarity protection for increased safety
- DIN rail mounting for flexible installation options. more

PoE injector

CHF339.–

Moxa INJ-24-T - PoE injector, maximum output of 30 W at 2448 VDC

802.3af (PoE), 802.3at (PoE+), 30 W

3. Moxa INJ-24 - PoE Injector, maximum output of 30 W at 2448 VDC, 0 to 60C operating temperature

The INJ-24 PoE injector from Moxa is a reliable solution for powering devices via Ethernet cable. With a maximum output of 30 W at 24/48 VDC, this PoE injector is ideal for use in various environments as it supports operating temperatures from 0 to 60 °C. The INJ-24 is equipped with an Ethernet interface that enables a high data transfer rate of up to 1000 Mbps. The easy installation on a DIN rail and the robust design with IP30 protection make it a practical choice for industrial applications. The injector also offers overload and reverse polarity protection, which increases safety and reliability during operation. Its compact dimensions and low weight make it easy to integrate into existing systems.

- Supports PoE standards IEEE 802.3af/at for an efficient power supply
- Automatic speed negotiation for optimum network performance
- Full/half-duplex mode for flexible network connections
- Robust plastic housing with IP30 protection for industrial applications
- DIN rail mounting for easy installation. more

PoE injector

CHF259.–

Moxa INJ-24 - PoE Injector, maximum output of 30 W at 2448 VDC, 0 to 60C operating temperature

802.3af (PoE), 802.3at (PoE+), 30 W