Best Dyson products in the Hand dryers category

On this page you'll find a ranking of the best Dyson products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.

1. Dyson Airblade V HU02

The Dyson Airblade HU02 is equipped with a digital motor and precise outlets. Noise tests show that it is 35% quieter than the previous model. The drive wheel achieves 90,000 revolutions per minute, so up to 30 litres of air can be sucked in per second. Fully integrated mechanical, electrical and aerodynamic components make this hand dryer an efficient and power-saving powerhouse. The Noise Abatement Society has tested and approved the decibel levels and acoustics of the Dyson Airblade V hand dryer and awarded it the Quiet Mark. Housing: Polycarbonate. Type of antibacterial coating: With HU02 (Sprayed Nickel), the antibacterial additive is in the paint. Can help prevent bacterial growth. Touch-free activation by capacitive sensors. Drying time:12 seconds. 

2. Dyson Airblade 9kj

The fast and energy-saving hand dryer with HEPA filter. According to the manufacturer, the Dyson Airblade 9kJ hand dryer consumes 9.1 kilojoules per use, operating costs are only 35 CHF per year when operating in Eco mode and produces up to 87% less CO2 than paper towels. The powerful motor rotates at 75,000 rpm and moves 23 liters of air per second - for dry hands in 10 seconds in Max mode. Two curved, 0.45 mm narrow slots create air streams at speeds of 624 km/h that follow the contours of your hands to remove water faster. Unlike some other hand dryers, Dyson Airblade hand dryers feature HEPA filters that remove 99.95% of particles, including bacteria and viruses. 

Dyson Airblade 9kj
Hand dryers
1007.–was 1186.–

Dyson Airblade 9kj


3. Dyson Airblade dB HEPA Filter

Dyson HEPA filter for Airblade AB01-AB14, air filter compatibility: Dyson Airblade, packing unit: 1 piece, suitable for type: AB01, AB03, AB03 white, AB05, AB06, AB07, AB07 white, AB14, AB14 white. 

4. Dyson Airblade Wash+Dry WD05 - high fitting

With the Airblade hand dryer technology in a tap, hands can be dried within 14 seconds. There is no need to move to a separate area to dry hands, so no dripping water on the floor. Touch-free infrared activation. Automatic switch-off: after 30 seconds. HEPA filter (glass fibre and fleece layers). Removes 99.95% of bacteria from the air. The Dyson Airblade Wash+Dry is compatible with most washbasins. Care should be taken to ensure that the
Make sure the washbasins are not sealed with a plug. Inserts with integrated plugs should not be used (e.g. pivoting ones or ones that can be lifted). Washbasin dimensions: All dimensions listed here are based on internal Dyson measurements unless otherwise listed. Washbasin width (minimum): 350 mm From front to back edge of washbasin (minimum): 300 mm Depth inside washbasin (minimum): 100 mm. Maximum depth inside the washbasin (WD06 only): 200 mm (According to external measurements of the washbasin). Washbasin material/ surfaces: Washbasins with high gloss surfaces - such as polished chrome - are not recommended. Ceramic or brushed steel sinks are ideal. If multiple Dyson Airblade Wash+Dry hand dryers are installed side by side, the distance between each tap should be at least 580 mm.

Dyson Airblade Wash+Dry WD05 - high fitting
Hand dryers

Dyson Airblade Wash+Dry WD05 - high fitting

5. Dyson Airblade drip tray black

Dyson drip tray with black wall protection plate, colour: black, dish holder: no holder, material: chrome steel, compatible with Dyson Airblade, integrated safety device, electropolished, screws and dowels. 

6. Dyson Airblade HEPA Filter

Dyson HEPA filter for Airblade V AB12 / V HU02, air filter compatibility: Dyson Airblade, packaging unit: 1 piece, suitable for type: V AB12 SNk, V AB12 white, V HU02. 

7. Dyson Airblade Wash+Dry WD04 - Short Fitting

Airblade hand drying technology in one tap. 14 seconds drying time. Hygienic performance with HEPA filter. 76% lower running costs than other hand dryers. 5 years warranty. 

Dyson Airblade Wash+Dry WD04 - Short Fitting
Hand dryers

Dyson Airblade Wash+Dry WD04 - Short Fitting

8. Dyson Airblade Wash+Dry WD06

Airblade hand drying technology in a tap. 14 seconds drying time.

9. Dyson Airblade drip pan

Dyson drip tray with wall protection plate. Can be easily unhooked. Built-in safety device, wall guard and wall bracket. With screws and plugs. Compatible with Dyson Airblade. 

10. Dyson Airblade dB AB14

The Airblade technology and the latest Dyson Digital Motor V4 generate fast air currents. The Dyson Airblade dB hand dryer is the fastest hand drying method. Fits in all washrooms and is especially recommended for places where the volume has to be as low as possible.

With Airblade technology, the air flows at 690 km/h through openings that are only 0.3 mm wide. The high speed of the air inevitably produces noises.

Dyson engineers have been able to reduce the noise level generated by the air currents. For this purpose, the shape of the outlet openings was redesigned. 50% quieter.

Other hand dryers are unhygienic. They filter neither bacteria nor viruses out of the washroom air. They suck in impure air, which then hits the hands. The Dyson Airblade dB hand dryer uses an H13 HEPA filter. 99.9% of bacteria and viruses are removed from the washroom air. So the hands are dried with clean and not with impure air.

Other hand drying methods cause higher operating costs. Paper towels must be regularly refilled and disposed of.

The calculations can be found here: