Televes Patch cable

Ethernet Patch Cable S/FTP Cat 6A LSFH, Gray

Pre-assembled Ethernet patch cable with an RJ45 connector on each end. It consists of a Category 6A data cable, type S/FTP (shielded pairs and shielded cable), featuring a flexible copper conductor of 26 AWG and an outer sheath made of gray LSFH (Low Smoke Free of Halogen).

Highlights

• Category 6A data cable
• S/FTP cable (shielded pairs)
• Flexible copper conductor (26 AWG)
• Compatible with PoE/PoE+ (Power over Ethernet) technology, allowing the cable to power network devices
• PE (Polyethylene) insulation for copper conductors, 1.1 mm diameter
• Aluminum-polyester shielding foil
• Outer shielding braid made of aluminum
• Gray LSFH (Low Smoke Free of Halogen) outer sheath, 0.59 mm thick and 6.2 mm in diameter
• 79% rated speed
• RJ45 connector with gold-plated contact ends, nickel-plated housing

Category 6A
Category Cat 6A data cables are derived from Cat 6 and are backward compatible with the standards of lower categories (Cat 6/5e and Cat 3). Category 6A extends beyond Category 6, allowing transmission frequencies of up to 500 MHz (per pair) and 10 Gbit/s throughput. It includes features and specifications to avoid interference and noise. This type of data cable can be used in 10BASE-T, 100BASE-T, 1000BASE-T, and 10GBASE-T compliant systems.

Our Category 6A cables are suitable for:

• Complies with TIA/EIA-568B.2-1
• Transmission rate of up to 10 Gbps
• Frequency range of up to 650 MHz (higher than the 500 MHz specified by the standard)
• Impedance of 100 Ohms
• DC resistance below 9.38 Ohms/100 m

The RJ45 connector is most commonly used in structured cabling networks. With its 8 conductors, it is suitable for both data networks (8 conductors) and telephone networks (2 conductors).