Schabus Gas detector Professional CO warning device GX C300

The CO sensor, the measuring cell, the evaluation, and the software underwent an extensive full inspection according to DIN EN 50291 at TÜV Süd. The system has been certified for safety and stability. The development of the professional CO alarm GX-C300 was a logical consequence of this. For a reliable CO warning system over many years, it is important to continuously monitor all relevant operating parameters, partially compensate for them, and respond appropriately to any irregularities that arise. With the TÜV Süd certified CO sensor GX-CO12 (Item No. 300712), all these monitoring processes and regular self-tests occur unnoticed in the background. Some of this data is displayed on a 2 x 16 character display on the GX-C300, where alarms, restarts, and errors are counted, and maximum values are stored and displayed. However, the special feature of the GX-C300 is its second relay, which only activates in case of malfunctions to inform building management systems or home automation about an error. The piezo sounder emits a short beep every 30 seconds, and the yellow LED blinks. There are temporary disturbances that the system resolves itself or simply ignores, other errors that are fixed by a hardware restart, and others where technical support assists. By pressing the SERVICE button, you can navigate to the error page on the display, read the error number, and pass it on to the technician, who will work with you to find a solution. Are the standards too strict or too lenient for you? The alarm levels and delay times of EN 50291 are well-suited for living spaces and rooms with residential-like use. The warning devices of the C300 series are often not used in residential environments, and you as a user may have entirely different ideas about meaningful warning levels. Contact us and let us know your wishes; our technical support and programming service are here to provide you with detailed advice.