Questions about Samsung Aa59-00741a

The original remote control has the manufacturer's number AA59-00638A. Apparently no longer available from Digitec: Samsung AA59-00638A Remote (1devices) The following product covers practically all functions (except light and camera): Samsung Remote Control TM1250

To pair the "Aa59-00741a" remote control with a Samsung TV, you need to point the remote control at the TV's IR receiver and enter the correct codes. As the remote control communicates via infrared, you do not need a special Bluetooth or Wi-Fi connection. The exact steps for entering the code are described in the user manual for the remote control or TV. If you have problems pairing the remote control, check that the remote control is programmed correctly and that the batteries are fully charged. If you do not have a manual, you can also visit the official Samsung website for more information.

To pair the remote control with your TV, there are no specific buttons to press as it is an infrared remote control. This remote control works by direct infrared signal transmission and does not require special pairing like Bluetooth devices. Make sure that the remote control is pointed at the TV's infrared receiver and that the batteries are sufficiently charged. If the remote control does not work, check the batteries and make sure that the TV's infrared receiver is not blocked.

No absolute answer can be given here: The vast majority of basic functions will probably work. Individual, very few buttons may not work.

it was a long time ago when i bought it... but it worked perfectly. and directly... you can still return it if it's not compatible for you... ✌

-Successfully use this remote control with try. Samsung TV sets. Also works with latest models

Hello Kerstin It would be important to know which television set you own.

In my opinion, this remote control should be upwardly compatible. I use this remote control successfully with the TV set of the latest series.

To switch on the 3D mode, you have to go to the menu under Display and change the 3D setting at the bottom; there is no button directly.

In my opinion, the remote controls are compatible with each other.

I think it should work, because it is an infrared remote control and does not need a special connection. You can also use the Samsung Onefor ALL remote control, which you can also teach.