Questions about One for All Smart WM2251

The Samsung Frame 32 inch cannot be mounted directly on the wall bracket as its hole pattern does not comply with the VESA standard. A special VESA adapter (e.g. MonLines V071) is required for mounting on a VESA-compatible wall bracket such as this one, which converts the individual hole pattern of the Samsung Frame 32 inch to a VESA standard of 200 x 200 mm. With this adapter, the Samsung Frame 32 inch can then also be attached to tilting and swivelling wall mounts. The wall mount supports VESA patterns up to 200 x 200 mm and a maximum screen diagonal of 43 inches, which is generally suitable for the 32-inch Samsung Frame. It is important that the adapter is used to ensure compatibility.

The "Smart WM2251" TV wall mount from One for All is compatible with the Philips 43PUS8009/12 as it supports the VESA mounting size of 200 x 100 mm. The wall mount is designed for screen diagonals of up to 43 inches and a payload of 30 kg.

The Smart WM2251 wall mount supports VESA sizes up to 200 x 200 mm. The Samsung UE50CU7100K uses a VESA size of 200 x 200 mm, so it should be compatible with this mount. However, always double-check the TV's specifications to ensure compatibility.

The One For All WM2251 Full-Motion TV Wall Mount does not turn 90 degrees to allow the TV to be moved vertically. It features a 180° turn (left and right) and a 15° tilt (up and down), but it does not support rotating the TV to a vertical position.

ja die passt hervorragend !!!

You can mount almost anything on it ... you are welcome to buy my wall bracket from me, as I have just rearranged my furniture ... is still 100% ok ... offer on (number removed, please do not share personal data).

The Sharp 32FG2EA32", FG2, LED, HD, 2022 TV has screw holes for 75 x 75 brackets. And the WM2251 has 4 75 x 75 holes, so it fits. 👍 I bought one of these too. Screws, spanners and spacer rings are all included.

Yes, 43 inches is perfect, I have the same

So if I remember correctly, everything you need for assembly was included, including dowels and screws for the wall (you need the 10 mm drill yourself ;-)

I bought two of these brackets. Both came with the plate shown in the first picture.

Hello, the TV can be pulled forward and also turned sideways. It can even be tilted a few degrees. Greetings

A 50" probably weighs too much

Hello As described in the data sheet, the bracket is suitable for a maximum screen diagonal of 27 inches! However, your TV has a diagonal of 40 inches. Therefore unsuitable! Kind regards

The max. distance from the wall to the TV set is 40 cm with the screen in a vertical position. With max. inclination: 42 cm at the top and 37 cm at the bottom. I hope this helps. Greetings Walti