Questions about FiiO BTA30 Pro

Yes, the FiiO BTA30 Pro can你的要求满足。 ### Connection to the TV and Sonos system - You can connect the Toslink output of your TV to the Toslink input of the FiiO BTA30 Pro. This makes it possible to transmit the audio signal from the TV to the FiiO BTA30 Pro. ### Connection to headphones and Sonos Playbar - From there, you can either send the audio signal to your Bose QuietComfort 35 II headphones via Bluetooth or alternatively forward it to your Sonos Playbar via the Toslink output. The device supports both options thanks to its different operating modes (Bluetooth transmitter and digital decoding mode). ### Pairing with the Bose headphones - Pairing with Bose headphones is done via the Bluetooth function of the FiiO BTA30 Pro. You must switch the BTA30 Pro to Bluetooth transmitter mode (TX) and pair the headphones with the device. Although the device does not have a display, you can control the connection and codec selection via the FiiO Music or FiiO Control app on your smartphone. ### App control - Yes, you can control the connection and various settings such as codec selection and volume via the FiiO app. This gives you a simple and convenient way to configure and operate the BTA30 Pro.

In the meantime, I have found out for myself what is needed. A 5V power supply with 500mA is sufficient to operate the fiio bta 30 or the pro version. A 5V power supply with 1A also works, of course, as the device only needs 500mA.

To transfer music from a Mac to a stereo system, you can use the FiiO BTA30 Pro as a Bluetooth transceiver. The BTA30 Pro can send digital audio input to other devices via Bluetooth. You can connect it to your Mac by operating the BTA30 Pro in Bluetooth transmitter mode and connecting it to your stereo system that can receive Bluetooth. Alternatively, you can use the BTA30 Pro as a DAC to convert the Mac's digital audio output to an analogue signal, which is then sent to the stereo system.

Yes, this can be confirmed. In the DAC mode of the FiiO BTA30 Pro, the device can indeed function as an audio interface. It can receive audio signals from a PC via a USB connection and convert them into high-quality analogue signals. - The BTA30 Pro supports USB inputs with a resolution of up to 32 bit and 384 kHz as well as native DSD512 decoding. - The device can be connected to a computer via the USB port and serves as a DAC to convert digital audio signals into high-quality analogue signals.

I always have our appliance plugged in, because when it is freshly started, you always have to press the button on the front to confirm the setting. If you can memorise the setting (press 2 or 3 times), it's no problem.

Hello It should be possible to connect two bluetooth headphones, but I haven't tried it myself.

I would suggest visiting the product web site for connection possibilities https://www.fiio.com/bta30pro. It is extremely flexible and is generally a good quality product. I use mine to connect Headphones to my PC via Bluetooth. This works very well. I can't really comment on your exact connection requirements as they are a little unclear but I would be surprised if you can't find a solution that works but be aware that this device is a connectivity enabler and not a amplifier.

Hello To answer the question, what source are you playing through the BTA 30Pro? According to your question, you connect the Toslink output of the BTA 30Pro to a Toslink input of the amplifier. If you want to use the BTA30 Pro without a USB DAC, you need a 5 volt power supply. I use the iFi Audio iPower MK2 with 5 volts, costs about 75 Fr. today at K55. But it's worth it for interference-free mains. If you use the DAC mode, i.e. from the laptop via USB A - C cable to the BTA30 Pro, the power is supplied by the laptop or PC. However, you would still have to know how the source plays with regard to the sampling rate. BTA30 Pro: Digital optical input (TOS / up to 96 kHz / 24 bit) BTA30 Pro: Digital optical output (TOS up to 192 kHz / 24 bit) The slight whistling can have several causes. 1. your amplifier can only play a low sampling rate. In this case, you would need to know how high your amplifier can receive? Your amplifier type? 2. normally Toslink is extremely interference free. However, interference can occur if a Toslink cable is defective. Cables that are too long can also cause interference. 3. there are also cheap Toslink cables that are not defective, but are not suitable because they are no good. Your Toslink cable? 4. if your source is a music player like iTunes, Winamp or whatever, and your source plays a sampling rate of 24 bit 192 kHz, there may be interference because the BTA 30Pro can only receive 24-bit 96 kHz. With Windows 10 / 11, you can check the sound settings to see how it is set. If you stream via Bluetooth from your mobile to the BTA30 Pro and then play from the Toslink output to the amplifier, it is possible that there may be interference from the mobile when you pause. 6. mobile phones and Wi-Fi can often interfere with the whole system. 7. is the whistling loud or only soft when paused? Since you have connected both the Cinch and Toslink outputs of the BTA30 Pro to the same amplifier, this can also interfere. Possibly a ground hum loop? In this case, disconnect the RCA connection and listen if the interference is gone. If not, then the other way round. 8. if it does not whistle with the cinch output, then listen with this output instead. I know this and it is very annoying. But as a rule, a cleanly separated power supply for BTA30 Pro is the best. Maybe some of this will help? Otherwise, write down exactly which source you play and which input you need on the BTA30 Pro. I already know the output. Then I would need to know which amplifier you need and the exact type? Greetings Roby

Hello - According to FiiO you can, but not in the best audio quality. It is best to download the app for Android and iOS, where you can also set configurations. English: TX (Bluetooth transmitting): connect the BTA30 Pro to the Bluetooth receiving device, Device 1 (PAIR1 is prior as default), and hold button C for about 3s to enter the pairing state again. The BTA30 Pro will automatically search for Device 2 and start to pair with it. Note: When working in LDAC and aptX LL codec in TX mode, the BTA30 Pro cannot be connected to two Bluetooth devices simultaneously. Audio Input/Output and their Priority German: TX (Bluetooth transmission): Connect the BTA30 Pro to the Bluetooth receiving device, device 1 (PAIR1 is upstream by default), and press and hold the C button for about 3 seconds to enter the pairing state again. The BTA30 Pro automatically searches for device 2 and starts pairing. Note: When working in LDAC and aptX LL codec in TX mode, the BTA30 Pro cannot be paired with two Bluetooth devices at the same time. Audio input/output and their priority Here is the whole manual: https://manuals.plus/fiio/bta30-pro-high-fidelity-bluetoothtransceiver-manual Good luck

I would recommend this one to you: LogiLink USB socket adapter (10.50 W)