Pattex Ultra Gel superglue
3 g, 3 ml, Minimum order 6More than 10 pieces in stock at third-party supplier
Product details
Pattex Instant Adhesive Ultra Gel 3g Colorless Tube
Manufacturer: Pattex
Description: Pattex Instant Adhesive Ultra Gel 3g Colorless Tube
Type: PSG2C
Country of Origin: Germany
ChemVOCFabV - VOC content for deliveries to Switzerland: 0.00
Hazardous Material - Storage Class: 10
REACH - Flash Point °C: 80-93
REACH - Hazard Pictogram: GHS07
REACH - Hazardous Material: yes
REACH - H-statements: H315 - Causes skin irritation. H319 - Causes serious eye irritation. H335 - May cause respiratory irritation. EUH202 - Cyanoacrylate. Danger. Bonds skin and eyelids in seconds. Keep out of reach of children.
REACH - Signal Words: Warning
REACH - WGK (Water Hazard Classes): WGK 2
Content: 3 g
Packaging: Tube
Color: Colorless
Temperature Resistance: -20 to +80 °C
Pack Size: 12 pieces
Additional Details:
- Gel-like
- Non-dripping
- Correctable for up to 10 seconds
- Water-resistant D3 according to DIN EN204
- High flexibility and impact resistance
- Very easy to use
- Suitable for outdoor use
- For bonding wood, cardboard, metal, leather, rubber, ceramics, porcelain, plastic (e.g., ABS, polystyrene, rigid PVC)
EAN: 4015000415040.
type of adhesive | Instant glue |
Material application | Ceramic, Metal, Plastic, Porcelain, Stone, Wood |
Area of use | Inside, Outside |
Documents | Safety data sheet.pdf |
Item number | 5843319 |
Manufacturer | Pattex |
Category | Glue |
Manufacturer no. | HE PSG2C |
Release date | 23.12.2022 |
Sales rank in Category Glue | 89 of 1096 |
Minimum order | 6 |
Colour | Transparent |
Exact colour description | Transparent |
Material group | Plastic |
Material | Ethyl-2-cyanoacrylate |
type of adhesive | Instant glue |
container shape | Parcel |
Heat resistant up to | 80 °C |
Additional properties | Water-resistant |
Definitive stop | 24 h |
Material application | Ceramic, Metal, Plastic, Porcelain, Stone, Wood |
Area of use | Inside, Outside |
Country of origin | Germany, Ireland, Poland |
CO₂ emissions | 0.05 kg |
Climate contribution | CHF 0.11 |
Items per sales unit | 1 pcs. |
Length | 165 mm |
Width | 80 mm |
Weight | 3 g |
Content | 3 ml |
Length | 17 cm |
Width | 8 cm |
Height | 2 cm |
Weight | 16 g |
Instructions for use | Substrate pre-treatment: The surfaces to be bonded must be sound, dry and free of grease and dust. If necessary, vacuum the substrate and clean with a solvent, e.g. white spirit. Completely remove old adhesive and sealant residues as well as unsound coatings and rust. Protect neighbouring surfaces with film or adhesive tape if necessary. Application: The application of PATTEX 100% depends on the materials to be bonded. As a rule, one-sided application is sufficient (see technical data sheet for details). The parts are joined together immediately after application of the adhesive and fixed for at least 30 minutes using adhesive tape or screw clamps. In contrast to other types of adhesive, it is NOT necessary to apply high pressure, but simply to hold the parts to be bonded in position. PATTEX 100% hardens by absorbing water from the environment. It must therefore be ensured that moisture can reach the adhesive during all bonding processes. Moisture suppliers are the air (air humidity/water vapour) or the substrate. Cleaning: Clean immediately after employees with a dry cloth. Fresh residues can be removed with alcohol or solvent. Cured adhesive can only be removed mechanically! Storage: Store in a frost-free, cool and dry place. Avoid direct sunlight. Keep out of the reach of children. |
GHS07 Health hazard- H315 Causes skin irritation.
- H319 Causes serious eye irritation.
- H335 May cause respiratory irritation.