NZR ZMZ 0215 Wash'n Dry insertion profile WM coin counter time-dependent 72530176

The ZMZ 0215 Wash n Dry time coin counter with coin slot for profile value tokens is adjustable by the customer. The release time and the number of coins can be set. After inserting a coin, the released time appears on the display. At the same time, the main relay is activated. The time reserve is reduced in one-second increments. By inserting additional coins, the time allocation is added accordingly. Due to the factory configuration with an integrated contactor, door release button, and internal counter, these devices are ideally suited for use with washing machines and tumble dryers.

The device is built using modern microprocessor technology, a high-quality precision coin validator with wire and thread blocking, counterfeit coin return, and coin insertion via profile value tokens. The basic time can be set to a maximum time reserve of 99 hours, 59 minutes, and 59 seconds. The smallest adjustable time unit is 1 second. The device accepts an unlimited number of coins until the maximum time reserve is reached. Simple time setting is facilitated by a logical menu navigation.

The 2-line LC display shows the remaining time, the coin pre-selection, and the type of coin. The coin container has a capacity of 80 pieces at €0.50 each. Connection is made easily via a 5-pin connector. The powder-coated stainless steel housing (RAL 7035 light gray) is equipped with a cylinder safety lock. There are two 6-digit internal coin counters, one of which is non-resettable for billing control. The door release occurs with a one-time delay of 1 minute at the push of a button.

The contactor for the 3-phase shutdown has a capacity of 3 x 20 A. The supply is 1 x 230 V, with a power consumption of 4 watts. The switching current is 3 x 20 A (AC1), and the output relay has 3 normally open contacts. The weight is 3.0 kg, and the dimensions are 185 x 238 x 150 mm.