Lanitz 25-095-010 Klebefolie Orastick L x B 10 m 60 cm Chrom-Hellgrün

Important Information: Do not install receiving antennas under the chrome-colored ORACOVER® or ORASTICK® films, as the aluminum-coated underside of the chrome films can interfere with signal reception. ORASTICK® self-adhesive chrome films are available in both chrome gloss and colored chrome tones. ORASTICK® is the ironable and heat-shrinkable adhesive film. In terms of properties, ORACOVER® and ORASTICK® are identical and can be processed together. However, the fundamental difference between the two products lies in the adhesive layer. While ORACOVER® is equipped with a heat-activatable adhesive, ORASTICK® features a self-adhesive pressure-sensitive adhesive.

Our Tip: Unstable wood fibers can become unstable and tear under stress. Wrinkling and, in the worst case, complete detachment of the fabric are the consequences. For optimal pre-treatment of your wooden surface, we recommend applying the ORASTICK® adhesive to the areas to be ironed. The ORASTICK® adhesive penetrates the wood and bonds the loose wood fibers in the core wood. This achieves excellent 3-D adhesion of the ORASTICK® film to the substrate. With the ORASTICK® adhesive, no further pre-treatment of the wood is necessary.

Application of the ORASTICK® adhesive:
1. Sand your wood thoroughly and remove the sanding dust (vacuum).
2. Stir the contents of the can well.
3. Apply the ORASTICK® adhesive 1-2 times thinly and evenly using a brush.
4. Allow the adhesive to dry overnight, but for at least 10 hours. (Do not sand again afterward)
5. Cover or stick your model as usual with the ORASTICK® adhesive film.

Coverage: approx. 1 can / 1 m². Not suitable for substrates that are not resistant to organic solvents.