Jumo 60000923 Temperature controller

The single-pole mechanical built-in thermostat is very robust due to its galvanized steel housing and can be used even under harsh conditions. The measuring system operates based on the principle of liquid expansion and can be used without issues up to a maximum allowable sensor temperature of 345 °C. The smooth round sensor made of high-quality stainless steel has a diameter of 6 mm and a sensor length of approximately 87 mm. The thermostat's capillary tube is made of copper and can be flexibly installed with a bending radius of 5 mm. The maximum allowable ambient temperature at the switch head is 80 °C. The switch head is secured using a mounting bridge with two screws M3 x 22. With the help of a setpoint adjuster, which is available as an accessory, the desired cutoff temperature can be easily set on a scale. The temperature controller features a high switching point accuracy of +/- 1.5% in the upper third of the scale. A significant advantage is that no additional auxiliary power is required for temperature measurement. The electrical connection is made at the flat connectors of the switching unit, which can directly switch a maximum allowable switching power of AC 230 volts / 16 A. The thermostat has a switching differential (hysteresis) of 2.5% of the scale range and automatically switches back to the original state after falling below the cutoff temperature by this value. The temperature controller is very versatile and is used in heating, air conditioning, and ventilation technology, as well as in the plastics industry, apparatus and furnace construction, and for temperature monitoring in laboratories and climate chambers. The device is approved according to DIN EN 14597 and has UL and EAC certification.