Gira 5551914

System 106 Keyless in Fingerprint Module Stainless Steel V4A - The fingerprint module serves as a professional biometric access control system based on next-generation surface scanning technology. It can be set up and managed via an app. It can be used as a stand-alone device with Gira TKS actuators or in combination with the Gira door communication system as a door call system for multi-unit buildings. It scans the outermost layer of skin using high-frequency technology. It offers a high recognition rate and protection against tampering. The system evaluates the unique characteristics of a living human finger. Up to 99 fingers can be managed by the fingerprint reader unit. It reliably recognizes fingers that may have been slightly injured during activities such as gardening (only the outermost layer of skin is affected). Data protection is ensured through encryption methods. The response time from placing the finger to unlocking is up to 1 second for about 30 stored fingers and approximately 3 seconds for up to 99 stored fingers. The fingerprint surface features a night design for orientation using white LED lighting. A 360° finger placement is possible. A three-color LED status indicator provides visual signals during programming and operation. A master PIN number is provided on the included sealed security card in case the administrator's finger is no longer available. The device can be factory reset with the included security card. An acoustic signal is emitted for users or installers via a confirmation tone. An alarm sounds if the fingerprint attachment is removed without authorization for sabotage detection. The sabotage circuit is connected to an actuator in the Gira door communication system. Inputs and outputs: plug-in connection cable for the Gira door communication system. Children's fingers can generally be reliably recognized from around the age of 6.