Elmeko MSE 20, 24 V DC, 30 W Dehumidifier 24 V/DC 30 W (W x H x D) 64 x 12

To prevent condensation in the control cabinet, we recommend using our control cabinet dehumidifiers. The air inside the cabinet is circulated through a cold surface within the dehumidifier, actively generating condensate. This condensate then drains down through the condensate hose. A sealing fitting or drainage element is installed at the bottom of the cabinet, to which the condensate hose can be connected. The device can be mounted on a TS 35 × 15 mm mounting rail or alternatively secured with M4 screws through the designated holes in the device. It is essential to maintain a horizontal installation position with the hose connection facing downwards. The condensate hose is pushed onto the hose connection at the bottom of the device and must lead into a container below the device or through the cabinet wall to the outside. Ideally, an OUT-FIT element from the accessories should be used for this purpose. A minimum distance of 80 mm must be maintained from adjacent devices above and in front, to ensure that the air intake (top of the device) and air outlet (front) are not obstructed.