Elmeko MSE 20, 12 V DC, 24 W Dehumidifier 12 V/DC 24 W (W x H x D) 64 x 12

To prevent condensation in the control cabinet, we recommend using our control cabinet dehumidifiers. The air inside the cabinet is circulated through a cold surface within the dehumidifier, actively generating condensate. This condensate then drains down through the condensate hose. A sealing fitting or a drainage element is installed in the lower part of the control cabinet, to which the condensate hose can be connected. The device can be mounted on a mounting rail TS 35 × 15 mm or alternatively secured with M4 screws through the designated holes in the device. The horizontal installation position with the hose connection facing down must be strictly adhered to. The condensate hose is pushed onto the hose connection at the bottom of the device and must lead into a container below the device or through the control cabinet wall to the outside. Ideally, an OUT-FIT element from the accessories should be used for this purpose. A minimum distance of 80 mm must be maintained from neighboring devices above and in front, to ensure that the air inlet (top of the device) and air outlet (front side) are not obstructed.