
Ubiquiti USW-Pro-XG-8-PoE Switch
Good day @Digitec When can we expect the addition of the Ubiquiti USW-Pro-XG-8-PoE Switch to your shop? Thanks



3
Good day @Digitec When can we expect the addition of the Ubiquiti USW-Pro-XG-8-PoE Switch to your shop? Thanks
3
Instead of max. speed, min. would probably be better.
2
Hello Community I need some tips as I'm a bit lost at the moment. Here is my current situation: - I have a 10Gb internet connection. - There is a NAS in the basement that is connected via fibre optics. - Various NAS and PCs are also located in the basement. - In my flat there are the usual devices such as tablets, laptops and TV. Goal: I want to get the full 10Gb to the NAS and the computers in the basement. Questions: 1. does it make sense to place the Zyxel XGS1250-12 in the flat near the ISP router? (Consideration: The ISP modem has a 10Gb RJ45 connection) https://www.digitec.ch/de/s1/product/zyxel-xgs1250-12-12-ports-netzwerk-switch-48767987 2. from the Zyxel switch I could go to the basement via a 10Gb fibre optic module. However, I want at least a 16 port switch there. I'm not sure which one would make sense. Maybe Mikrotik? https://www.digitec.ch/de/s1/product/mikrotik-crs310-8g2sin-10-ports-netzwerk-switch-37808389 Do you have any other alternatives? My current setup is already over 15 years old, so an upgrade would certainly make sense. :) Many thanks for your help!
1
MacStudio 10Gibt NAS DS923+ from Synologie with 10Gbit TRENDnet, model TEG-S762, CAT6a KAbel, FRITZ!Box 7950 but only get 450mb/s on 10Gibt !?? Can someone help me .... Do I need another switch ?? Kind regards Nicolai
3
Hello together I have installed approx. 16 Lan connections in my house and now need a suitable switch. The following devices will be used: TV, Apple Smart TV, PC, mesh systems, smart home bridges, printers, maybe cameras in the future. Can you recommend a device with approx. 24 ports for a 19 rack? I assume an unmanaged switch would be best for my knowledge and requirements. Many thanks and best regards
4
Hello Digitec family, will the USW-Flex-2.5G-8-PoE be available for purchase from you?
1
Dear Digitec, Please stop using thousands of Mbit when you could just use Gbit - it doesn't make a search any simpler
0
I would like the telephone number for Geneva. Thank you
1
For me it would be logical: - Select category "PoE injectors" - Set filter for "Active PoE" - sort by price Unfortunately, this does not work in the shop. How do I still get there?
4
Any idea when this will be available for purchase? https://techspecs.ui.com/unifi... Unmanaged 2.5Gb five port, PoE power in, no PoE out, switch. US pricing is super cheap. I think this thing is going to sell like hot cakes!
8
Good evening, Several products are missing from the "RJ45 10 Gigabit Ethernet" filters with 1x,2x,4x,5x,6x,8x,10x... 10Gb, such as ASUS, TP-Link, Trendnet, Zyxel, Netgear, D-Link, Cisco, only Qnap is mentioned. Thank you.
0
Will you be adding the new Pro Max switches to your range? I'm sure I'm not the only one who has been waiting for the 2.5Gb RJ45 + 10Gb SFP+ combo. https://ui.com/switching...
1
Hi there, I feel a bit lost with the filters available to search for switches which ports are 2.5 Gbps but also have SFP+ ports. Is there a way this can be improved?
1
Good morning Which largest possible 2.5 inch SSD from which manufacturer runs in a Cloudkey UCK-G2_Plus as a replacement for the installed 1 TB Toshiba hard drive? I have not found any real answers on the Internet :smiling_face: Thanks for your feedback Rob
4
Hello Community I would like to install a LAN connection in every room in our home. Now I am looking for a suitable switch. I have the following product in mind: https://www.digitec.ch/de/s1/product/ubiquiti-enterprise-24-poe-26-ports-netzwerk-switch-15898607 The reason is: - Enough ports - 12x 2.5-G RJ45 ports (prepared for the future) - 2x 10-G SFP+ - PoE+ (for access point and cameras) - Access points and cameras also from Ubiquiti The question is, can I install this in the attic? From up there, old coaxial cables go into every room, which I could replace with the network cable. However, it gets very hot up there in the summer and correspondingly cold in the winter. Can the switch withstand this? Network cables I looked at these two: Favourite: https://www.digitec.ch/de/s1/product/goobay-ghmt-zertifiziertes-cat-81-verlegekabel-sftp-pimf-gelb-sftp-sstp-cat81-100-m-netzwerkkabel-24073923 Alternative: https://www.digitec.ch/de/s1/product/roline-netzwerkkabel-sftp-pimf-cat81-100-m-netzwerkkabel-13951656 What is the difference, other than double the price? I have picked out the following Keystone socket: https://www.digitec.ch/de/s1/product/delock-keystone-modul-rj45-buchse-zu-lsa-cat81-werkzeugfrei-netzwerk-zubehoer-netzwerk-zubehoer-23158115 Does this also have to be PoE-capable? Or is it enough if the switch is? What is better/recommended. Mount the RJ45 plug directly on the installation cable and connect it directly to the switch, e.g. with this plug. https://www.digitec.ch/de/s1/product/delock-keystone-modul-rj45-buchse-zu-lsa-cat81-werkzeugfrei-netzwerk-zubehoer-netzwerk-zubehoer-23158115 or also a socket and a patch panel? https://www.digitec.ch/de/s1/product/delock-gehaeuse-keystone-patchpanel-12-port-schwarz-patch-panel-netzwerk-zubehoer-17231539?ip=Patchpanel+gehä Thank you in advance for your articles and help.
2
There is chaos here! Numerous switches are marked as PDs, but they are not. How can one find what one is looking for?
2
I need help on which model of Swich I should buy to increase the number of outputs on the router. I already have four devices connected and just don't have room for a fifth connection cable to the internet. I am looking for a device that costs between 50 and 100 francs. Thank you for your help.
3
Hello I am a layman.....which switch do you recommend? Router (unfortunately only has 2 LAN ports): https://www.galaxus.ch/de/s1/product/zyxel-nr5101-router-21359521?ip=Nr5101 I need at least 3 ports. 1x old Synology NAS. 1x Philips Hue Bridge and 1x Sonos speaker. Thank you!!! 😎
0
Hello together I have a question, which switch is recommended for Swisscom TV UHD?
2
The corresponding entry in "Power supply" does not seem to work -- many selected models still have a "no" in "Powerde Device" in the comparison table ....?
3
Good day I am looking for a 24 port managed switch with at least 12 POE ports (power budget is not so important) which does not have a fan. Have only found a model from D-Link, unfortunately it is not available anywhere
2
Hello Together I have installed 2 fibre optic connections at home. My current router (which will remain) from my provider is connected to one of them. However, it only has 1 Gbit/s ports. Since I would like to have more than 1 Gbit/s, I was wondering if it is possible to connect a switch with 10 Gbit/s ports to the 2nd fibre connection. If so, what do I need to look out for when buying a switch?
5
I am looking for a quiet switch, or more precisely, one with a quiet power supply. I bought this switch: https://www.digitec.ch/de/s1/product/netgear-gs308-300pes-8-ports-switch-11025859?supplier=406802 unfortunately the power supply whistles. this high-frequency sound is like tinnitus and makes the switch unusable for me. It would be great if you could recommend a switch that you have used yourself and know does not whistle.
3
Hello together I am looking for a small Gigabit POE switch (max. 8 ports) where individual ports can be deactivated according to a schedule for energy-related reasons. Example: Connected access point should be deactivated at night. Can anyone recommend a specific product? Thank you and greetings Fabio
10
It is quite confusing when looking for a switch that supports 10Gbit/s speed when the cheapest models "only" offer 10Gbit/s in the uplink, but not on the individual Ethernet ports. Especially with the latest Salt Fiber offering, you want to be able to distribute the speed further internally. The backplane speed would also be helpful if it were included in the specifications.
28
Hello I have installed a 20 m LogiLink Cat 6a flat cable from the router to the office. Since the router doesn't have enough ports, I bought a UniFi Switch Lite 8 PoE, which is right next to the router. Now I have noticed that there is no signal in the office when I plug the cable into the switch. But when I plug the cable into the router (Wingo Internetbox) everything works. In the office there is a UniFi Switch 8 with UniFi 6 Lite AP. Unfortunately, I have already noticed that PoE does not work, but this is due to the cable. My question is: Do the switches have different "transmission powers" for the signal? Would it possibly work with a different switch? I actually wanted to replace the Wingobox.
10
Hello Board We are soon to move into our new home and the question of network equipment arises. Since I haven't been very active in keeping up with the state of the art for a while, I'd like to ask around here and would be grateful for any input. Initial situation: - 3x AP connection (plan to use Ubiquiti UniFi AP AC NanoHD via POE). - FTTH (quickline - modem still unknown, 19" rack available) - planned 2xTV via TV Box - 2x PC via LAN - 3x bits and pieces (PV system, NAS, printer) - a few reserves would certainly not go amiss So the requirements are minimal. Which switch would you recommend for this? It should be as easy to manage as possible. Greetings and thanks!
5
Here's the scenario: I need a switch that has at least 4 ports and utilises my NAS in the internal network. It should also have passive cooling (so that you don't hear anything from it). Link agregation is mandatory for the switch. The following will be connected to the switch: Internet from the router (1Gb/s) LAN cable to laptop (via Thunderbold adapter up to 40GB/s) Synology Diskstation DS916+ with expansion and Link Agregation (2x1Gb/s) Playstation (max 1Gb/s) TV (max 1Gb/s) Reciver (max 1Gb/s) Set Top Box (max 1Gb/s) Reserve port (min. 1Gb/s) (some of the devices are plugged directly into the router. Unfortunately, this does not support link agregation) The goal is to download data from my laptop to the DiskStation at full speed. The switch should be as cheap as possible. Thanks for your help.
4
Which switch do I have to choose to connect the Samsung Smart TV and the Sunrise TV box (= 2 cables) to the LAN (= 1 connection in the wall)? In any case, this splitter does not work: https://www.digitec.ch/de/s1/product/logilink-splitter-netzwerkmodul-netzwerk-zubehoer-12702245?supplier=406802 The product descriptions for it are quite meagre.
3
Dear Community I have several end devices which are 10 Gbit compatible (NAS, Mac mini, router all RJ45). Now I want to connect these devices and am looking for the right switch. In the past I have often used Ubiquiti devices and was very happy with them. Would you still recommend the slightly older US-XG switches. Or should I use something else like a MikroTik device? Has anyone had any experience with this? The information on the net is a bit sparse and the product selection at Digitec is huge.
10
30 of 57 threads