3D printers

Is there an alternative with similarly good printing results and in a similar price range to the Bambu Lab P1S? Important: You must be able to print completely offline and via cable (not WLAN). I don't care whether USB or network cable. In any case, this is much less susceptible to interference than wireless. I would be really enthusiastic about the Bambu Lab P1S if it only had a USB or RJ45 connection and allowed offline printing. But the SD card version is too complicated for me. I might as well use a floppy disc. Thanks in advance for possible alternatives. It's about a small printer farm with 5 to 10 devices.

  3

Hello, which 3D printer should I choose that is easy to use, high quality and functional for children? Please give me some advice. I am lost between these brands.

  2

The K2 PRO, which is the smaller brother of the K2 Plus with a 300 print bed, is currently being released. Are there already plans or a date when it will be available from you?

  4

hello folks, i have a question, i got myself a used ender 3 se (i think it's the se, there are dozens of ender 3 so to be honest i don't know which one i have, i definitely did NOT find it here, never mind .... my question about printers is .... i'm currently printing for about 28 hours ... for one figure .... if i took a more expensive one, would it be faster? .... what else is better about a 500-700 fr printer as opposed to a 260 fr piece? (i've been printing for a week now, so i'm still green behind the ears)

  1

Hello, are you thinking of selling this printer on your site? Elegoo Centauri carbon - https://www.youtube.com/watch

  1

Will Digitec be adding the new Bambu Lab H2D to its range? If so, when might it be available? Thanks for the info! Miloš

  2

Dear Digitec, are there any plans to add the new Prusa i3 MK4S to the range? Apparently it is an excellent product which is even manufactured in Europe ;)

  7

The idea is actually obvious, and I'm always surprised that it hasn't been implemented. But it would be useful to be able to filter by the number of extruders! After all, the data is recorded ...

  4

Hello Will the Bambu Lab A1 be added to the range at Digitec / Galaxus?

  5

Hello, Do you think Bambulab accessories will ever be available on Digitec?

  2

Hello together and hello dear PM I wanted to start the Q&A session here and knock on Digitec's door. What do you think of the new Bambu Lab X1? Will you be importing the new Bambu Lab X1 Series? Now the printer is out of its Kickstarter campaign and you can officially pre-order it. I see this as a printer that heralds a new age in terms of technology and looks. If you can order the printer here in the future, I will be one of the first to buy it. I don't think we should let this opportunity pass us by. Greetings Marc

+14

  28

Will the Bambu Lab filament be available at Galaxus one day? It would be really handy to be able to buy spare parts and filament from Galaxus.

  1

In layman's terms, I have an iMac and a son. And I would like to use the former to make simple little models for the latter, like Fimo on the computer (figurines, animals, etc.). I have no knowledge of 3D printing or CAD. What do you recommend? Regarding printers and software. It can be assumed that father and son have an average frustration tolerance (father's slightly higher). Thank you!

  5

Will you be adding the Snapmaker Artisan (https://snapmaker.com/snapmaker-...) to your range?

  5

can it be that you have fewer filters when browsing 3D printers - I am looking for the filter "number of extruders" ....

  0

Which 3D printers are already equipped from the start for the use of 3mm (2.85mm) filaments? Should be able to process PLA and ABS.

  5

Could FDF 3D printers from Elegoo be included in the range, e.g. Elegoo neptune 3?

  2

Digitec is one of the most expensive stored for 3D printers. :(

  3

When will the Raise3D Pro3 printer be available at Digitec?

  1

Hey everyone. I have no idea about 3D printing. Not yet... xD Can anyone recommend me a printer which is not too complicated and not very expensive? And how long does 1kg filament last? Thank you ;)

  3

Hi I would like to start 3D printing, but I have no idea which printer to start with. It would be important to me that it is quiet and does not cost the earth. Can anyone recommend something to me?

+4

  14

So, now that Creality has announced new printers, like the CR-10 Smart Pro, Ender 3 S1, Sermoon V1 and Sermoon V1 Pro, when can we expect you to start carrying them? Also, if you need someone to evaluate say the Ender 3 S1 and all attachments, I'll be happy to take one off your hands 😉, already have an Ender 3 v2 and Halot One (CL-60) bought from you.

  5

When will the Anycubic Vyper be available? I would be very interested

  2

Why the heck did the Anycubic Mega X become 80.- more expensive within 3-4 days? Especially since it is/was an item available from stock....

  1

Value digitec Team Please check whether the 3D printers from Kywoo 3D would be suitable for your range. The mechanics of the printers are very stable, precision shafts and a linear guide are built in. The support from the still rather young company is said to be very good. https://www.kywoo3d.com/ Overview of advantages: - Robust mechanics with precision shafts and linear guides - Metal extruder with direct drive - WIFI connection - Meanwell PSU - Dual Z-axis (synchronous) - Auto Leveling - 32 Bit Mainboard Greetings Oliver

  1

Hello Together I am looking for a quiet 3D printer. It would be my first one so I would need one suitable for beginners. my budget would be about 500 francs I hope someone can help me.

  3

Couldn't the same printing methods be grouped together? If ISO/ASTM 52900 were taken as a template, the FDM, FFF and PJP methods would be combined into the category Material Extrusion (SLA and DLP become Vat Photopolymerisation). Would make filtering easier... Happy Easter!

  0

There are now dozens of different models from many manufacturers. All of them have advantages and disadvantages... of course ;-) Now, I would like to know from you which is your favourite 3D printer and why? If you want, you can respond to the following points: - Arguments - price - Most convincing features - Why would you recommend the printer? - Filament compatibility - ... I am looking forward to your comments. :-)

+1

  7

I am looking for a way to print my own figures for Dungeons and Dragons. Price-wise, I'll probably have to do without SLA, even though it's supposed to give me the most detailed figures. However, I would be interested to know if there are any here who have experience and tips regarding the printer and the print templates used. LG

  2

Does anyone have any experience with the device?

  5