Hello, I'm looking for an LED strip to fix around a false kitchen ceiling. But the access hatch doesn't allow me to slide in a 30-31 mm thick power supply. The width (around 80 mm) and length are not a problem. The full length is 8 m, which I can divide into two strips and two feeds. It would be great if it could also be controlled with Zigbee or Hue. Anything you can recommend?
2
Hello everyone, I want to fit my new LG TV with a Philips Hue Play Gradient Lightstrip. I used to have a Phillips Ambient Light TV, where the light doesn't go around the entire TV, but only around the "box" (power, TV, connections). So I thought maybe a shorter light strip would be enough. Although I can't go all the way round this "box" at the back of the LG, because there are still outlets on the top and the connections for the playback devices on the side. Long story short, have you also fitted your LG OLED 65" with a Philips Hue light strip? What are your experiences and what length is really suitable for a 65" TV or does it really have to be the full length?
0
Is there a simple LED strip that I can also operate with a rechargeable battery? I can't find the details.
2
Hi everyone, I'm probably just not awake yet, but I'm looking for LED strips that are a maximum of 5mm wide. However, I have almost never found any indication of width on the products. Does anyone have a good tip as to which product might fit into my 6mm gap? Length; approx. 5m and with RGB. Thanks for your help and happy holidays.
0
hallo digitec team wann kommt der bei euch im shop ? (govee.com/govee-led-strip-light-2-pro) grüsse
1
Will the Govee range be expanded? What about the H60A1 ceiling light? The new Snyc Box with HDMI 2.1 will be released in a month's time. Will it also be available here, and if so, when?
0
Hello dear Community I have beam beds and would like to install warm white LED strips (2,500 to 3,300 K) on the underside. I have a 3-gang socket under the bed with one switched and two non-switched outlets. 1st configuration: The LEDs are switched on and off via a switched socket. When I switch them on, the idea would be that the LED strips retain the "presets". Specifically: I dim to 20%, switch off via the wall switch of the switched socket and when I switch on again, the light switches back on at 20% (and not at 100%). 2nd configuration (if possible; I can also tinker with this): I install a motion detector on the underside of the bed and have a setup where I connect both the switched socket and an unswitched socket. When I press the light switch, the LED switches on/off with the functionality described under 1. If the button is not pressed/is off, the motion detector is active instead and switches on (possibly even with a different preset than in the first case), and only if a) it is dark and b) something moves. I would probably have to have something like a power strip that has two inputs and two outputs: If power comes from input 1, output 1 is switched on and output 2 is switched off, if power comes from input 2, output 1 is switched off and output 2 is switched on (and then I connect two control devices/transformers from there to the LED). Is there such a thing?
2
Hello, is the indication of the luminous intensity in lumens and the power consumption in watts for the LED strips per individual diode or for the whole strip?
0
I don't get very far with a cable length of 1.50 m, because the power supply unit always hangs in the middle of the room.
6
I am looking for an LED tape that can be glued in a circle. Which product is best suited for this?
0
Hello people, I am currently in the process of building a retro gaming piece of furniture. The basis is a Kallax shelf with 8 compartments. So far so good. Now it's about the lighting of those compartments. Ideally, it would be possible to light each shelf individually in one colour, the whole thing should be reasonably affordable and hue compatible. Many led strips are too long (would only need approx. 30 cm - 1m)... As an alternative, I picked out the Playbar. Do you have any ideas or experience? Greetings and thanks already
1
Good evening everyone I am looking for a controller for the LEDBERG LED strip from Ikea to integrate it into my Smarthome. If possible with Homekit integration. I have already searched a few and came across this controller. https://www.digitec.ch/de/s1/product/gledopto-controller-zigbee-30-rgbw-beleuchtung-zubehoer-15791740 Do you think this could work? With kind regards
1
Hello Digitec, will you or will you not include the Govee Dreamcolor Led srtips in your range at some point? LG
4
Hello Digitec Community I am looking for an LED about 5m long where each LED is addressable (WS2812B). I want to create my own Ambilight with an Arduino Uno Rev3. Can anyone here recommend an LED strip? Thanks LG Oliver
1
Is there a minimum 2m long LED strip with the functions described above. We don't have a socket and want to illuminate a sign on the outside wall only in the evening. Thank you.
0
Hello all I would like to light an approx. 4.5m wall and an approx. 6m+4.5m wall (with corner) via ceiling and control it with a remote condition SEPARATELY (rather without smartphone app). I am considering gluing/mounting a profile with diffuser to the wall. Which light source or manufacturer can you recommend if I want a dimmable luminosity of approx. 20W/m or up to approx. 2500lm/m and switch between warm/neutral/cold white (approx. 2500k-6500k). I do not need other colours, only different white tones. I would also have the option of using two switched sockets, but I don't have to.
1
Hello, I am looking for an LED strip that gives off a bright but warm light. I want to attach it to the back of the table, so it doesn't have to be longer than 2 metres. Can anyone recommend something? Thank you very much!
2
Hello I am looking for Led strips that have a multicolour, colour gradient and are 15m long. They should also be self-adhesive for the ceiling. If someone could help me, I would be very grateful.
2
Hello, I am looking for an LED strip that can light up in several colours at the same time and thus create a colour gradient over +- 5m. Can anyone help me?
1
Hello together I am looking for LED strips including controller which I want to switch on and off with a light switch. The controller should therefore preferably switch on again in the last setting. Thank you very much for your help!
1
Dear Community I suspect that this is not available as a complete set. Individually it is probably: x RGB 5v LED strips à 0.5m x Battery compartments for each LED strip x controllers for each RGB 5v LED strip and 1 remote control for the controllers But I am not sure. I also have absolutely no idea where I can get something like this (or how I can filter it with the search on Digitec). Does anyone know a shop near Zurich or an online shop for such things? It's for an art project. The strips are only used for a short time at a time and are mobile. That's why it has to be battery operated, unfortunately. Can anyone help me?
0
Hello together I am looking for LED strips that can be battery operated and remote controlled to illuminate a shelf. Is there such a thing at all? Thanks for your feedback and tips!
2
Hello Together I am looking for LED strips with saturated colours for my bedroom. I would like to have the strips around the TV, table and my bed. It would be perfect if they were 30cm long and I could plug them together. Thanks a lot for your help!
3
Something like this could perhaps be solved with small thumbnails. The problem is that I don't currently trust myself to choose the right product as a supplement to my existing NO-name LED strip.
1
Hello digitec It would be good if you could filter the LED strips by length - Thanks
1
Hi, I would like to set up an adaptive led backlight system for my PC (gaming), so that I can automatically change the colour of the LEDs to match the current game. Can you recommend what I need for this (if possible from Digitec, otherwise also from other stores...)? Thanks
0
Good evening. Which Led strips are suitable for TV backlighting? Thank you for your help.
1
I would like to decorate my room a bit, fix a few LEDs under my desk. Which LEDs would you recommend? (Preferably degradable)
1
I would like to decorate my room a bit, fix a few LEDs under my desk. Which LEDs would you recommend? (Preferably degradable)
0
Actually, the title says it all. A good example is the car radio bezels. There is only the brand for filtering, but not e.g. for which car brands (e.g. screen XY for car XY)....
1
30 of 31 threads