Best selling Power inverters from TDK
This page always stays fresh and updates automatically.
1. AC/DC built-in power supply Lambda HW
High quality industrial power supply for continuous operation. Peak load reserve of up to 300% for 5 seconds. Long lifetime. Extended manufacturer's warranty.
2. DC/DC-Wandler 18... 76V 5V 3A 15W
The DC/DC converter from TDK is a reliable solution for voltage conversion, supporting an input voltage range of 18 to 76 volts and providing a stable output voltage of 5 volts with a maximum output current of 3 amperes. With a rated power of 15 watts, this converter is ideal for various applications where precise voltage regulation is required. Its high efficiency of 87% ensures that less energy is wasted, leading to better overall performance. The converter is designed for through-hole mounting and offers an isolation voltage of 1.5 kV, ensuring additional safety. Thanks to the overcurrent protection, the converter is also safeguarded against overloads, enhancing its longevity and reliability. The compact design, with a width and length of 25.4 mm and a height of 9.9 mm, allows for easy integration into various systems.
- Input voltage range of 18 to 76 V for flexible applications
- High efficiency of 87% to reduce energy losses
- Isolation voltage of 1.5 kV for increased safety
- Overcurrent protection for reliable operation.
3. LS-100-15 AC/DC built-in power supply unit
TDK Lambda power supply. In the power range of 100 watts, the power supply sets new quality standards. The output voltage is 15 V/DC and can be precisely adjusted in the application via a potentiometer.
4. Medizinischer Konverter zur Leiterplattenmontage 60W 24V 2.5A
The medical converter for PCB mounting from TDK is a high-performance device designed for applications in medical technology. With a rated power of 60 watts and a stable output voltage of 24 volts, this voltage converter provides a reliable power supply for various medical devices. The converter features a high efficiency of 87% and is suitable for a wide input voltage range of 85 to 264 volts. It can operate in a temperature range of -40 °C to 90 °C, making it ideal for demanding environments. The long mean time between failures (MTBF) of 200,000 hours ensures high reliability and durability. The converter meets strict medical standards, making it a safe choice for critical applications.
- High efficiency of 87%
- Operating temperature range of -40 °C to 90 °C
- MTBF of 200,000 hours for high reliability
- Input voltage range of 85 to 264 V
- Complies with medical standards (UL/CSA/IEC/EN 60950-1).
5. Wandler, Leiterplattenmontage 10W 12V 450mA
The converter for PCB mounting with a nominal power of 10 watts and an output voltage of 12 volts is a reliable solution for various electronic applications. With an output current of 450 mA, this device provides stable performance suitable for many devices. The voltage converter is designed to operate in a temperature range of -10 °C to 70 °C, making it versatile. An efficiency of 75% ensures that the converter operates reliably even under higher loads. With a compact design measuring 45 mm in width, 20.5 mm in height, and 64 mm in length, it is ideal for integration into various systems. Additionally, the converter meets relevant safety standards and offers a 2-year warranty, providing extra security for users.
- Two output voltages of 12 V and -12 V
- Operating temperature range of -10 °C to 70 °C
- High efficiency of 75% for reliable operation
- Compact design for easy integration.
6. Lambda i7C4W008A120V-0C1-R DC/DC converter 8A 300W Contents 1pc.
The non-isolated step-up/step-down converters of the i7C series, with a nominal power of up to 300 W, are highly versatile due to their wide adjustable output voltage range of 9.6 to 48 V and a wide input range of 9 to 53 V. The i7C series is excellent for deriving additional high-power output voltages from a 12 V, 24 V, 36 V, or 48 V DC power supply, at significantly lower costs than isolated DC-DC converters. The i7C modules are available in three different mechanical designs, all sharing a footprint of 36.8 x 34 mm with a 1/16-Brick pinout. The most compact solution is the i7C as an open circuit board with a height of just 12.2 mm. For applications with higher ambient temperatures, there are additional variants with a baseplate for contact cooling at a height of 13 mm or an integrated heatsink for convection cooling or airflow at a height of 24.9 mm. Standard features of the i7C series include a trim pin for adjusting the output voltage, + Remote Sense, Remote On-Off (positive or negative logic), overcurrent and overtemperature protection, as well as input-side undervoltage shutdown. Optional models are available with additional features such as a Power-Good signal, current monitoring, and a synchronization input for the switching frequency to reduce system noise when using multiple converters. With efficiencies of up to 97%, these compact products are ideal for use in medical, telecommunications, industrial, testing and measurement technology, broadcasting and television, as well as in portable battery-operated devices.
7. DC/DC-Wandler 18... 36V 12V 250mA 6W
The DC/DC converter from TDK is a powerful voltage converter designed for applications that require a reliable and customizable power supply. With an input voltage range of 18 to 36 volts and a rated power of 6 watts, this device provides a stable output voltage of 12 volts at a maximum output current of 250 mA. The converter is housed in a compact DIP package, allowing for easy integration into various electronic systems. Its high efficiency of 86% ensures minimal heat generation even during prolonged operation. Additionally, the converter is equipped with protection features such as overvoltage and overcurrent protection, making it a safe choice for critical applications. With a 5-year warranty, TDK also offers long-term reliability and support for this product.
- Customizable output voltage between 11.4 V and 15 V
- Isolation voltage of 500 V for enhanced safety
- MTBF (Mean Time Between Failures) of -999 for long-term reliability
- Ripple and noise of only 120 mV
- Through-hole mounting for easy installation.
8. DC/DC-Wandler 9... 36V 5V 3A 15W
The DC/DC converter from TDK is a reliable solution for voltage conversion, supporting an input voltage range of 9 to 36 V and providing a stable output voltage of 5 V with a maximum output current of 3 A. With a rated power of 15 W, this converter is ideal for various applications where precise voltage regulation is required. Its high efficiency of 87% ensures that less energy is wasted, leading to better overall performance. The converter is equipped with overcurrent protection to ensure the safety and longevity of the device. Thanks to its compact design, measuring 25.4 mm in width and length and 9.9 mm in height, it can be easily integrated into various systems. The through-hole mounting allows for straightforward installation, while the adjustable output voltage range of 4.5 V to 5.5 V offers additional flexibility.
- Input voltage range of 9 to 36 V
- Output voltage of 5 V at 3 A
- High efficiency of 87%
- Overcurrent protection for enhanced safety.
9. AC/DC built-in power supply unit
TDK-Lambda power supply at an extremely affordable price. In the power range of 100 watts, this power supply sets new quality standards. TDK-Lambda offers a 5-year warranty on the device, which can operate with pure convection cooling at ambient temperatures up to 70 °C (derating starts at 50 °C). The output voltage is 48 V/DC and can be precisely adjusted in the application using a potentiometer.
10. DC/DC-Wandler 9... 36V 12V 2.5A 30W
The DC/DC converter from TDK is a reliable solution for voltage adjustment in various applications. With an input voltage range of 9 to 36 volts and a stable output voltage of 12 volts, this converter offers a rated power of 30 watts and a maximum output current of 2.5 amperes. Its high efficiency of 89% ensures that less energy is wasted, making it an environmentally friendly choice. The converter is designed for through-hole mounting and features overcurrent protection for added safety. With a compact design and an isolation voltage of 1.5 kV, this voltage converter is ideal for use in various electrical systems where a reliable power supply is required.
- Input voltage range of 9 to 36 V
- High efficiency of 89%
- Overcurrent protection for added safety
- Compact design for easy integration.
Product order
See all products