You're not connected to the Internet.
Supermicro X10SDV-4C-TLN4F: Mini-ITX, 4-c (BGA 1667, Intel SoC, Mini ITX) Actual product image
CHF 669.–

Supermicro X10SDV-4C-TLN4F: Mini-ITX, 4-c (BGA 1667, Intel SoC, Mini ITX)

Specifications

Key specifications

PCI express version (max.)3

General information

Manufacturer Supermicro
Product type Motherboards
i

Motherboards

In personal computers, a motherboard is the central printed circuit board (PCB) in many modern computers and holds many of the crucial components of the system, providing connectors for other peripherals. The motherboard is sometimes alternatively known as the mainboard, system board, or, on Apple computers, the logic board. It is also sometimes casually shortened to mobo.

More information...

Item number5837305
Manufacturer no.MBD-X10SDV-4C-TLN4F-O
External links Manufacturer's site (de)

Motherboard properties

Form factor
Mini ITX
i

Mini ITX

Mini-ITX is a 17 x 17 cm (or 6.7 x 6.7 inches) low-power motherboard form factor developed by VIA Technologies in 2001. Mini-ITX is slightly smaller than microATX and screw-compatible with it. Mini-ITX boards can often be passively cooled due to their low power consumption architecture, which makes them useful for home theater PC systems, where fan noise can detract from the cinema experience. Beside that specific application, they are commonly used in small form factor (SFF) computer systems.

More information...

CPU socket
i

CPU socket

A CPU socket or CPU slot is a mechanical component that provides mechanical and electrical connections between a microprocessor and a printed circuit board (PCB). This allows the CPU to be replaced without soldering.
Common sockets have retention clips that apply a constant force, which must be overcome when a device is inserted. For chips with a large number of pins, either zero-insertion force (ZIF) sockets or land grid array (LGA) sockets are used instead. These designs apply a compression force once either a handle (for ZIF type) or a surface plate (LGA type) is put into place. This provides superior mechanical retention while avoiding the risk of bending pins when inserting the chip into the socket.

More information...

BGA 1667
Chipset
Intel SoC
SuperSpeed USB 3.0
Yes
UEFI BIOS
Yes

Processor

Onboard processor
Yes
Processor type
Intel Xeon D-1518
Processor clock frequency
2200 MHz
Number of processor cores
i

Number of processor cores

A multi-core processor (or chip-level multiprocessor, CMP) combines two or more independent cores (normally a CPU) into a single package composed of a single integrated circuit (IC), called a die, or more dies packaged together. A dual-core processor contains two cores, and a quad-core processor contains four cores.

More information...

4 (Quad core)
i

4 (Quad core)

The processor has four cores.

More information...

Memory

Number of memory modules
4 x
Max. memory
128 GB
Memory chip
DDR4-2133
,
DDR4-1600
,
DDR4-1866
Memory type
DDR4-RAM
RAM buffer
i

RAM buffer

In addition to bandwidth and capacity variants, modules can
1. Optionally implement ECC, which is an extra data byte lane used for correcting minor errors and detecting major errors for better reliability. Modules with ECC are identified by an additional ECC in their designation.
2. Be "registered", which improves signal integrity (and hence potentially clock speed and physical slot capacity) by electrically buffering the signals at a cost of an extra clock of increased latency. Those modules are identified by an additional R in their designation, whereas non-registered (a.k.a. "unbuffered") RAM may be identified by an additional U in the designation.
3. Be Fully buffered modules, which are designated by F or FB and do not have the same notch position as other classes. Fully buffered modules cannot be used with motherboards that are made for registered modules, and the different notch position physically prevents their insertion.

ECC
Memory form factor
DIMM 288
Memory voltage
1.20 V

Mass storage controller 1

Data storage controller
Intel onboard
i

Intel onboard

More information...

S-ATA III
i

S-ATA III

Serial ATA (SATA) is a computer bus interface for connecting host bus adapters to mass storage devices such as hard disk drives and optical drives. Serial ATA 3 can transfer up to 6 Gbit/s.

More information...

6 x
RAID configuration
0
i

0

(block-level striping without parity or mirroring) has no (or zero) redundancy. It provides improved performance and additional storage but no fault tolerance.

More information...

,
1
i

1

(mirroring without parity or striping), data are written identically to two drives, thereby producing a "mirrored set"; the read request is serviced by either of the two drives containing the requested data, whichever one involves least seek time plus rotational latency.

More information...

,
5
i

5

(block-level striping with distributed parity) distributes parity along with the data and requires all drives but one to be present to operate; the array is not destroyed by a single drive failure.

More information...

,
10
i

10

A RAID 10 group is a RAID 0 over several RAID 1, combining the characteristics of both RAIDs: security and increased read/write speed.
A RAID 10 network requires at least four hard disks.

More information...

Expansion slots

PCI express version (max.)
3
PCI Express x16
i

PCI Express x16

PCI Express ("Peripheral Component Interconnect Express", abbreviated: PCIe or PCI-E) is an extension standard for connecting peripheral devices to the chipset of a main processor. PCIe is the successor of PCI, PCI-X and AGP and offers a higher data transfer rate per pin compared to its predecessors.
During its development the interface was called "3GIO", which stands for "3rd Generation Input/Output".

More information...

1 x

Expansion slot speed

PCI-E 3.0 x16 (@x16)
1 x

Graphic connectors

VGA
i

VGA

A VGA connector as it is commonly known (other names include RGB connector, D-sub 15, mini sub D15 and mini D15) is a three-row 15 pin DE-15. There are four versions: original and DDC2 pinouts, the far older and less flexible DE-9 connector, and a Mini-VGA used for laptops.
The common 15-pin VGA connector found on most video cards, computer monitors, and other devices, is almost universally called "HD-15". HD stands for "high-density", which distinguishes it from connectors having the same form factor but only 2 rows of pins. However, this connector is often incorrectly referred to as a DB-15 or HDB-15.[citation needed]
"VGA connectors" and their associated cabling are almost always used solely to carry analog component RGBHV (red - green - blue - horizontal sync - vertical sync) video signals along with DDC2 digital clock and data.
Where size is a constraint (such as laptops) a mini-VGA port can sometimes be found in place of the full-sized VGA connector.

1 x

Network

RJ45/LAN port
i

RJ45/LAN port

Network connection allows connection to an internal or external network.

More information...

4 x
Max. port speed
i

Max. port speed

Describes the maximum data transfer rate. Is not necessarily supported by all ports.

More information...

10000 Mbit/s (10 gigabit ethernet)
i

10000 Mbit/s (10 gigabit ethernet)

In computer networking, 10 gigabit Ethernet (10GE or 10GbE or 10 GigE) refers to various technologies for transmitting Ethernet frames at a rate of 10 gigabits per second (10×109 or 10 billion bits per second).

More information...

Ethernet controller brand
Intel
i

Intel

Intel Corporation is an American multinational semiconductor chip maker corporation headquartered in Santa Clara, California.

More information...

Ethernet controller
Intel i350-AM2

Internal interfaces

USB 2.0 type A
i

USB 2.0 type A

Universal Serial Bus (USB) is a serial bus standard to interface devices. USB was designed to allow many peripherals to be connected using a single standardized interface socket and to improve the plug-and-play capabilities by allowing devices to be connected and disconnected without rebooting the computer (hot swapping). Other convenient features include providing power to low-consumption devices without the need for an external power supply and allowing many devices to be used without requiring manufacturer specific, individual device drivers to be installed.
The Mini-B, Micro-A, Micro-B , and Micro-AB connectors are used for smaller devices such as PDAs, mobile phones or digital cameras. The Standard-A plug is approximately 4 by 12 mm, the Standard-B approximately 7 by 8 mm, and the Micro-A and Micro-B plugs approximately 2 by 7 mm.

More information...

1 x
Number of fan connector
4
Serial Header
1 x

External interfaces

USB 3.0 type A
2 x

Power supply

i

Power supply

All power supply related details.

Power connectors
24-pin ATX
i

24-pin ATX

More information...

Delivery contents

S-ATA cable
2 x

Product dimensions

Length
170 mm
Width
170 mm

Please click directly on the incorrect data to access the registration form.

Alternatively, you can register a generic error report (wrong picture, unsuitable accessories, etc.)

Cancel

This information may include unverified machine translations. Thank you for reporting any incorrect data to translations@digitecgalaxus.ch.

Correction suggestion

Comment

This information may include unverified machine translations. Thank you for reporting any incorrect data to translations@digitecgalaxus.ch.

Returns and warranty

Warranty 36 month Bring-in
30-day right of return
i

30-day right of return

Unfortunately, we cannot accept a product if it is damaged, incomplete or missing its original packaging.

Returns and warranty

Please use our simplified returns and warranty process to return a product or register a warranty case. Returns and warranty

Please use our simplified warranty process to view the warranty period as well as any warranty extensions you may have purchased. This will ensure that your return or warranty case is processed quickly and effectively.

Warranty services

Warranty extension

Warranty extension

Extension of the manufacturer's warranty.

to 4 years CHF 60.90

More information about warranty services

Availability

Mail delivery

Expected delivery time: approx. 10 – 12 days
Currently 1 piece(s) in stock at the supplier

Collection

All locations

Expected delivery time: approx. 10 – 12 days
Currently 1 piece(s) in stock at the supplier

If ordered immediately. Information subject to change.

Questions about this product

The 1 most helpful customer questions


What's your question to the Community?

The Community terms and conditions apply.
If you have any questions about your order, please contact the Customer service.

Product ratings

Overall rating

Avg. 1.0 of 5 stars


Your rating

To what extent does the product meet your expectations?


The 1 most useful ratings

User Pille99
X10SDV-4C-TLN4F: Mini-ITX, 4-c (BGA 1667, Intel SoC, Mini ITX)

Gutes board aber falsch verkauft, eigentlich nicht zu verkaufen

last die finger von dem Board. Nicht weil es nicht brilliant ist sondern weil Ihr keine CPU Luefter bekommt.
wenn ihr das Board wollt, kauft unbedingt x10sdv-XX+XXXX ------- man achte auf das + (plus) - dieses sagt das es MIT CPU Luefter ist. Digitec team - nimmt den scheiss aus den regalen und ersetzt es mit den Boards mit einem + in Namen. Ausserdem bitte ich euch, gedanken darueber zu machen wie ich an den gottverdammten luefter komm (sorry, ich bin wirklich pissed deswegen. nur einige firmen verkaufen den luefter aber nur zu fimen kunden und nicht an PRIVAT). Ausserdem MUESST Ihr unbedingt die 4 Pin luefter kaufen damit das PWM funktioniert. sonst warden die Luefter nicht reguliertmore


+
+
-
-

13.07.2017
4 Comments
Report abuse

You must log in to report an abuse.

Supermicro X10SDV-4C-TLN4F: Mini-ITX, 4-c (BGA 1667, Intel SoC, Mini ITX) Supermicro X10SDV-4C-TLN4F: Mini-ITX, 4-c (BGA 1667, Intel SoC, Mini ITX)