Range = C4000
Series = C41E
Beam resolution = 30mm
Assembly type = Receiver
Safety type = 4
SIL = 3
EN ISO 13849-1 = e
Number of beams = 45
Contactor height = 900mm
Detection distance min. = 0m
Detection
Series = C41E
Beam resolution = 30mm
Assembly type = Receiver
Safety type = 4
SIL = 3
EN ISO 13849-1 = e
Number of beams = 45
Contactor height = 900mm
Detection distance min. = 0m
Detection
distance max. = 6m
Response time max. = 12 ms
Supply voltage = 24 Vdc
Width = 28.5mm
The installation and operation of this safety device must be carried out in strict compliance with the enclosed operating instructions. Further guidance on the use of active optoelectronic protective devices (AOPD) can be found in Health ; Safety Executive Guidance Note HSG180 and relevant standards. C4000, type 4, hand protection. The C4000 safety photoelectric sensor is widely used in industry in high risk safety applications where job site protection is required to Application Category 4, EN 954. The system consists of a transmitter and receiver and can be used with optional interfaces as required. Applications:. Press brakes, press machines and hydraulic press, robotic elements, special machines. Performance features:. Easy mounting and alignment Short response time (≤34 ms) Alignment aid 2 OSSD outputs (output signal switching components) Display with seven segments EDM (external device monitoring) M12 connector Small housing 28.5 x 33.5 mm IP65 According to type 2, IEC 61496, tested and approved.
Response time max. = 12 ms
Supply voltage = 24 Vdc
Width = 28.5mm
The installation and operation of this safety device must be carried out in strict compliance with the enclosed operating instructions. Further guidance on the use of active optoelectronic protective devices (AOPD) can be found in Health ; Safety Executive Guidance Note HSG180 and relevant standards. C4000, type 4, hand protection. The C4000 safety photoelectric sensor is widely used in industry in high risk safety applications where job site protection is required to Application Category 4, EN 954. The system consists of a transmitter and receiver and can be used with optional interfaces as required. Applications:. Press brakes, press machines and hydraulic press, robotic elements, special machines. Performance features:. Easy mounting and alignment Short response time (≤34 ms) Alignment aid 2 OSSD outputs (output signal switching components) Display with seven segments EDM (external device monitoring) M12 connector Small housing 28.5 x 33.5 mm IP65 According to type 2, IEC 61496, tested and approved.
| Item number | 10101484 |
| Manufacturer | |
| Category | |
| Manufacturer no. | C41E-0903AG300 |
| Release date | 11/13/2018 |
| External links |
| Width | 17 cm |
| Height | 10 cm |
| Weight | 1.80 kg |
Specifications may include unverified machine translations.