The black Kaze Master Flat II Fan expert Scythe offers quite an ordinary fan controller, the fan controller for up to four fans deviates from the usual display concepts, where the Display speeds, temperatures, or time-of-day a large, from all angles easy-to-read digital block display. This smart Design Trick in the 5.25-inch Panel is reminiscent of digital watches, is a real eye-catcher on every case and makes the Reading of the data, even over larger distances - for example, in the case of a HTPC from the Sofa is very possible.
The backlight can be divided into four levels, and thus offers the possibility, the brightness of the display to their own needs, as well as the current environment. For PC temperature control, the four Sensors with a measuring range from 0Â° Celsius to 100Â° Celsius.
A small Jumper on the display of the temperature can be changed between Celsius and Fahrenheit. In addition, the acoustic signal output via a second Jumper to disable. Thanks to the built-in button cell, the Scythe Kaze Master Flat II indicates, at any time, the previously adjusted time, regardless of whether the PC has been powered on.
One of the most basic innovation is the improved voltage regulation of the individual fan channels is. Up to four channels are for the fan control, with Fans with 3 - or 4-Pin connector and up to 36 watts or 3 amps per Channel all of the cables are supported (in the scope of delivery). This provides an extended operating range of the fan controller, as powerful or more fans per channel can now be easily used.
The adjustable voltage range is between 3.7 and 12 volts so the fan will start to rotate with a higher initial voltage, during startup, momentarily full 12 volts. The four freely in the housing and positionable temperature sensors give Feedback about the current heat level in the Case.
In order to avoid Overheating of the computer that has the Scythe Kaze Master Flat II is also a warning function for fan failure and Exceeding the measured and preset temperatures. The Temperature warning zone can be defined by 50#176;C to 90 and#176;C in 1#176; increments. By means of a switch, the battery can be switched on and off tables Alarm temporarily, or by means of a Jumper permanently.
This is indicated by an audible beep and by a flashing display. The speed of the fan should decrease due to a fault or to a lower voltage for 10 seconds to 0 will be interrupted for safety reasons, the power supply to the fan. This minimizes the risk of damage to the fan or the fan controller. The power supply can be enabled again.
Because Scythe has not for the knob, but instead, for four in addition to the LC-Display is arranged, and flat push-buttons can be used the Scythe Kaze Master Flat II in PC cases with front flap or door. It occupies one external 5.25-inch Bay. The fan controller gets its power via a SATA connector.…more