You're not connected to the Internet.

Description

We crammed ALL THE NEOPIXELS into this strip! An unbelievable 144 individually-controllable LED pixels on a flexible PCB per Meter. It's completely out of control and ready for you to blink. This strip has a white mask, and an extra heavy flex PCB.

These LED strips are even more fun and glowy. There are 288 RGB LEDs on this 2 meter strip, and you can control each LED individually! Yes, that's right, this is the digitally-addressable type of LED strip. You can set the color of each LED's red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel). The LEDs are controlled by shift-registers that are chained up and down the strip so you can shorten or lengthen the strip. Only 1 digital out pin is required to send data. The PWM is built into each LED-chip so once you set the color you can stop talking to the strip and it will continue to PWM all the LEDs for you.

All your high-density LED dreams answered, yet there are a few things to watch for.

First up, the ultra-high density means much higher power usage over a certain distance -35 Watts max (~7 Amps @ 5V). The max rating is assuming all the LEDs are on full white, usually the actual current for colorful design is about 1/3 to 1/2 the max current. A good power supply such as our 5V 10A supply is key!
Second, to get high density, the controller chip is inside the LED, which is kind of cool, but also means that the chip only uses a single pin for input and a single pin for output. The protocol used is very very timing-specific and can only be controlled by microcontrollers with highly repeatable 100nS timing precision. We have example code for using with the Arduino Uno/Mega microcontroller at 8MHz and 16MHz, but it will not work with the Raspberry Pi, Basic Stamp, NETduino, any other interpreted/virtual machine microprocessor or any processor slower than 8 MHz. For those processors, check our 32 LED/meter digital LED strip which has SPI-like input/output and works well with Pi, NETduino, and other processors.
Third, just because you have all those pixels doesn't mean you have the RAM for it - the entire strip must be buffered in memory, and we've found many Arduino UNO projects only have about 500bytes of RAM available after all the extras are included - enough for about 1 meter of the 144 LED pixels. If you want to drive multiple meters and have some other libraries included, use a Mega.
This strip does not come with a waterproof sheathing, we're working on it but as it's a custom sized strip, the sheathing is custom too. We have no ETA as to when we will have the waterproof version, for now we only have this version available!
The strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters, there are cut-lines every LED. Solder to the 0.1" copper pads and you're good to go. Of course, you can also connect strips together to make them longer, just watch how much current you need! You must use a 5V DC power supply to power these strips, do not use higher than 6V or you can destroy the entire strip.

They come in 2 meter strips with a 3-pin JST SM connector on each end and separated power/ground wires. There is a join in the middle of the strip and the LEDs are not perfectly spaced at that point - it's just a tradeoff with the ability of the flex PCB maker and density.

To wire up these strips we suggest picking up a 2.1mm DC jack to wire in so you can connect one of our wall adapters to power it. You can connect to the input side with any sort of wire. We don't stock the matching 3-pin JST connector!
more

Specifications

Click 'show more' to display specifications.

General information

Manufacturer Play-Zone
Product type Electronics LED
Item number5998260
Manufacturer no.P00000688

Please click directly on the incorrect data to access the registration form.

Alternatively, you can register a generic error-report (wrong picture, unsuitable accessories, etc.)

Cancel

Report incorrect data

Correction suggestion

Comment

Report incorrect data

If you wish to learn more about this product, please visit the manufacturer's website or contact us: digitec@digitec.ch

Warranty & right to return

Warranty 24 month Bring-in

Limited right of return

Warranty and return

Please use our simplified returns and warranty process to return a product or register a warranty case. Returns and warranty

Please use our simplified warranty process to view the warranty period as well as any warranty extensions you may have purchased. This will ensure that your return or warranty case is processed quickly and effectively.

Availability

Mail delivery

 Currently unavailable. Delivery date unknown.
We do not have any information regarding the delivery date. It will be shown as soon as it's known.

Information subject to change.

Customer questions and answers

No questions so far.

Do you have a question? Ask the digitec community.

Ask a question

Ask other customers about product properties, performance or use.

Customer ratings

This product has not yet been rated.

Have you tested this product? Share your opinion with the digitec community.

(0)
Rate product
Play-Zone NeoPixel Digital RGB LED Strip 144 LED 2M Weiss PCB Play-Zone NeoPixel Digital RGB LED Strip 144 LED 2M Weiss PCB