You're not connected to the Internet.
CHF 79.90

Linksprite DiamondBack Wifi-Enabled Arduino-Clone (ATmega328P)

A fully compatible Arduino-Clone with WiFi on the same PCB - a true two in one!

Art-Nr 5998743
approx. 2 weeks Currently 2 piece(s) in stock at the supplier

Availability

  • approx. 2 weeks
    Currently 2 piece(s) in stock at the supplier

If ordered immediately.
Information subject to change.

Linksprite DiamondBack Wifi-Enabled Arduino-Clone (ATmega328P) Actual product image
CHF 79.90

Linksprite DiamondBack Wifi-Enabled Arduino-Clone (ATmega328P)

Description

The DiamondBack is an Arduino Duemilanove compatible clone that has 802.11b wireless connectivity baked directly onto the board. The components have been switched out for surface mount equivalents to free up space for the wireless module. It is fully compatible with the Processing/Wiring IDE. The DiamondBack will give your Arduino projects added wireless connectivity without the need for additional bulky shields!

Fully Compatible with Asynclab BlackWidow!

size compatible with existing Arduino Uno, Duemilanove and Diecimila boards

Wifi-Features:
Uses SPI for host communication (max speed 25MHz)
On-board PCB antenna

Wifi-Module Features:
802.11b Wi-Fi certified
-1Mbps and 2Mbps throughput speeds

Supports both infrastructure (BSS) and ad hoc (IBSS) wireless networks

Ability to create secured and unsecured networks
-WEP (64-bit and 128-bit)
-WPA/WPA2 (TKIP and AES) PSK

Low power usage
-Sleep mode: 250A
-Transmit: 230mA
-Receive: 85mA

Pin Usage

SPI:
Slave select (SS) : Arduino pin 10 (port B, pin 2)
Clock (SCK) : Arduino pin 13 (port B, pin 5)
Master in, slave out (MISO) : Arduino pin 12 (port B, pin 4)
Master out, slave in (MOSI) : Arduino pin 11 (port B, pin 3)

Interrupt (Uses only one of the following, depending on jumper
setting):
INT0 : Arduino pin 2 (port D, pin 2)
DIG8 : Arduino pin 8 (port B, pin 0)
more

Specifications

Key specifications

Memory0 MB
Additionally required (not included)Power supply

General information

Manufacturer Linksprite
Product type Development boards + Kits
Item number5998743
Manufacturer no.P00000308

Target group

Target group
Adults
i

Adults

An adult is a human being or living organism that is of relatively mature age, typically associated with sexual maturity and the attainment of reproductive age.

More information...

Level
Advanced

Development board properties

Development board type
board
Processor family
AVR
Processor type
ATmega328P
Memory
0 MB
Flash memory
32 kB

Power supply

i

Power supply

All power supply related details.

Power supply
Electrical connection
,
USB bus-powered

Wireless connectivity

i

Wireless connectivity

All network connectivity bluetooth, infrared ports, WLAN, UMTS etc.
Standards are listed here as well.

Wi-Fi
Yes
Wi-Fi standard
802.11 b
i

802.11 b

IEEE 802.11b-1999 or 802.11b, is an amendment to the IEEE 802.11 specification that extended throughput up to 11 Mbit/s using the same 2.4 GHz band.

More information...

Connections

Analogue inputs
6
Number of I/O
14
USB 2.0
1 x
Additional connections
SPI

Delivery contents

Additionally required (not included)
i

Additionally required (not included)

For the operation of the product required, but not included.

Power supply
i

Power supply

A power supply is a device that supplies electrical energy to one or more electric loads. The term is most commonly applied to devices that convert one form of electrical energy to another, though it may also refer to devices that convert another form of energy (e.g., mechanical, chemical, solar) to electrical energy. A regulated power supply is one that controls the output voltage or current to a specific value; the controlled value is held nearly constant despite variations in either load current or the voltage supplied by the power supply's energy source.

More information...


Please click directly on the incorrect data to access the registration form.

Alternatively, you can register a generic error report (wrong picture, unsuitable accessories, etc.)

Cancel

Report incorrect data here. The specifications may also include unverified machine translations. Thank you for reporting translation errors to translations@digitecgalaxus.ch.

Correction suggestion

Comment

Report incorrect data here. The specifications may also include unverified machine translations. Thank you for reporting translation errors to translations@digitecgalaxus.ch.

Returns and warranty

Warranty 24 month Bring-in
30-day right of return
i

30-day right of return

Unfortunately, we cannot accept a product if it is damaged, incomplete or missing its original packaging.

Returns and warranty

Please use our simplified returns and warranty process to return a product or register a warranty case. Returns and warranty

Please use our simplified process, which shows the correct warranty period and takes into account any warranty extensions you have purchased. This ensures that your return or case can be processed as quickly and easily as possible.

Warranty services

Warranty extension

Warranty extension

Extension of the manufacturer's warranty.

to 3 years CHF 10.20
to 5 years CHF 15.30

More information about warranty services

Availability

Mail delivery

Expected delivery time: 2 weeks
Currently 2 piece(s) in stock at the supplier

Collection

All locations

Expected delivery time: 2 weeks
Currently 2 piece(s) in stock at the supplier

If ordered immediately. Information subject to change.

Questions about this product

No questions so far.

Have a question? Ask the digitec Community.


What's your question to the Community?

The Community terms and conditions apply.
If you have any questions about your order, please contact the Customer service.

Product ratings

Your rating

To what extent does the product meet your expectations?

Linksprite DiamondBack Wifi-Enabled Arduino-Clone (ATmega328P) Linksprite DiamondBack Wifi-Enabled Arduino-Clone (ATmega328P)