You're not connected to the Internet.
LANCOM L-322agn Actual product image
CHF 461.–

LANCOM L-322agn

Description

DualBand Wireless Access Point up to 300 Mbit/s, with Mimo technology, 802.3af PoE power supply via Ethernet

Two integrated 802.11n radio modules for simultaneous operation in 2.4 and 5 GHz, Multi-SSID and VLAN, QoS, direct support in LANCOM WLAN controllers, see data sheet for further specifications

Operating modes: Router, WLAN AP, WLAN Bridge, WLAN Client, Four 3 dBi Dipole Dual Band Antennas
more

Specifications

Key specifications

Max. port speed1000 Mbit/s

General information

Manufacturer LANCOM
Product type Access points + Repeaters
i

Access points + Repeaters

In computer networking, a wireless access point (AP) is a device that allows wireless devices to connect to a wired network using Wi-Fi, or related standards. The AP usually connects to a router (via a wired network) if it's a standalone device, or is part of a router itself.

More information...

Item number262351
Manufacturer no.L-322agn
Release date04.08.2011
May include power adapter Yes
i

This product may require a power adapter. If this is the case, a suitable adapter is included in the delivery.

Application range

Application site
Business
i

Business

A business is a legally recognized organizational entity designed to provide goods or services.

More information...

Place of installation
Wall
i

Wall

A wall (from Latin parietes) is a usually solid structure that defines and sometimes protects an area, but always verticle. Most commonly, a wall delineates a building and supports its superstructure, separates space in buildings into rooms, or protects or delineates a space in the open air. There are three principal types of structural walls: building walls, exterior boundary walls, and retaining walls.

More information...

Access point properties

Operating modes
Access point
i

Access point

A wireless access point, also known as an access point (AP) or base station, is an electronic device that acts as an interface for wireless communication devices.

More information...

,
bridge
i

bridge

A wireless bridge is a hardware component used to connect two or more network segments (LANs or parts of a LAN) which are physically and logically (by protocol) separated.

More information...

802.11 g/n transmission rate
300 Mbit/s
Number of antennas
i

Number of antennas

Describes the number of physically installed antennas.

4 x
Wi-Fi encryption
WEP
i

WEP

Wired Equivalent Privacy (WEP) is a security algorithm for IEEE 802.11 wireless networks. Introduced as part of the original 802.11 standard ratified in September 1999, its intention was to provide data confidentiality comparable to that of a traditional wired network.

More information...

,
WPA-EAP
i

WPA-EAP

WPA contains the architecture of WEP, but provides additional protection through dynamic keys based on the Temporal Key Integrity Protocol (TKIP) and offers pre-shared key (PSK) or Extensible Authentication Protocol (EAP) authentication via IEEE 802.1X.
EAP - Extensible Authentication Protocol RFC 3748 (Request for Comments) is a general authentication protocol developed by the Internet Engineering Task Force (IETF) that supports various authentication methods (such as user name/password (RADIUS), electronic certification, SIM (Subscriber Identity Module), etc.). EAP is often used for access control in WLAN (Wireless Local Area Network) networks.

More information...

,
WPA2-EAP
i

WPA2-EAP

Wi-Fi Protected Access 2 (WPA2) is the implementation of a security standard for wireless networks according to the WLAN standards IEEE 802.11a, b, g and n and is based on the Advanced Encryption Standard (AES). It is the successor of WPA, which is based on Wired Equivalent Privacy (WEP), which is now considered unsafe. WPA2 implements the basic features of the new IEEE 802.11i security standard.

EAP - Extensible Authentication Protocol RFC 3748 (Request for Comments) is a general authentication protocol developed by the Internet Engineering Task Force (IETF) that supports various authentication methods (such as user name/password (RADIUS), electronic certification, SIM (Subscriber Identity Module), etc.). EAP is often used for access control in WLAN (Wireless Local Area Network) networks.

More information...

Number of RJ45/LAN ports
2
Max. port speed
i

Max. port speed

Describes the maximum data transfer rate. Is not necessarily supported by all ports.

More information...

1000 Mbit/s
i

1000 Mbit/s

In computer networking, Gigabit Ethernet (GbE or 1 GigE) is a term describing various technologies for transmitting Ethernet frames at a rate of a gigabit per second (1,000,000,000 bits per second).

More information...

PoE
i

PoE

Power over Ethernet (PoE) refers to a procedure, with the network-enabled devices via an 8-wire Ethernet cable can be powered. Please note the difference between consumption / power supply by PoE and the submission of PoE to other devices over Ethernet with power.

More information...

Yes

Wi-Fi standard

802.11a
i

802.11a

IEEE 802.11a-1999 or 802.11a, is an amendment to the IEEE 802.11 specification that added a higher throughput of up to 54 Mbit/s by using the 5 GHz band.

More information...

Yes
802.11b
i

802.11b

802.11b has a maximum raw data rate of 11 Mbit/s and uses the same media access method defined in the original standard. 802.11b products appeared on the market in early 2000, since 802.11b is a direct extension of the modulation technique defined in the original standard. The dramatic increase in throughput of 802.11b (compared to the original standard) along with simultaneous substantial price reductions led to the rapid acceptance of 802.11b as the definitive wireless LAN technology.

More information...

Yes
802.11g
i

802.11g

This works in the 2.4 GHz band (like 802.11b) but operates at a maximum raw data rate of 54 Mbit/s, or about 19 Mbit/s net throughput. 802.11g hardware is fully backwards compatible with 802.11b hardware.

Yes
802.11n
i

802.11n

802.11n is a proposed amendment which improves upon the previous 802.11 standards by adding multiple-input multiple-output (MIMO) and many other newer features. Though there are already many products on the market based on Draft 2.0 of this proposal, the TGn workgroup is not expected to finalize the amendment until November 2008.

Yes
802.11n
Dual band
i

Dual band

The term dual band refers to the ability of mobile phones to establish connections on both frequency ranges used in Europe.
In Europe, network operators use two frequency bands, in the 900 MHz range (originally called the D network) and in the 1800 MHz range.

Mains supply properties

Power consumption
14.40 W

Product dimensions

Length
210 mm
Width
140 mm
Height
45 mm

Please click directly on the incorrect data to access the registration form.

Alternatively, you can register a generic error report (wrong picture, unsuitable accessories, etc.)

Cancel

Report incorrect data here. The specifications may also include unverified machine translations. Thank you for reporting translation errors to translations@digitecgalaxus.ch.

Correction suggestion

Comment

Report incorrect data here. The specifications may also include unverified machine translations. Thank you for reporting translation errors to translations@digitecgalaxus.ch.

Downloads

Brochure | 487.05 KB

Returns and warranty

Warranty 36 month Bring-in
30-day right of return
i

30-day right of return

Unfortunately, we cannot accept a product if it is damaged, incomplete or missing its original packaging.

Returns and warranty

Please use our simplified returns and warranty process to return a product or register a warranty case. Returns and warranty

Please use our simplified process, which shows the correct warranty period and takes into account any warranty extensions you have purchased. This ensures that your return or case can be processed as quickly and easily as possible.

Warranty services

Warranty extension

Warranty extension

Extension of the manufacturer's warranty.

to 4 years CHF 43.–

More information about warranty services

Availability

Mail delivery

Expected delivery time: approx. 6 – 8 days
Currently 5 piece(s) in stock at the supplier

Collection

All locations

Expected delivery time: approx. 6 – 8 days
Currently 5 piece(s) in stock at the supplier

If ordered immediately. Information subject to change.

Matching accessories

Network accessories

Wall Mount (Wall mount)
CHF 43.20
LANCOM Wall Mount (Wall mount)

Availability

  • approx. 6 – 8 days
    Currently 3 piece(s) in stock at the supplier

If ordered immediately.
Information subject to change.

View details

+1

Goes well with

Network accessories

Serial Adapter Kit (Cable Accessories)
CHF 39.60
LANCOM Serial Adapter Kit (Cable Accessories)

Availability

  • approx. 2–3 weeks
    Currently 1 piece(s) in stock at the supplier

If ordered immediately.
Information subject to change.

View details

Questions about this product

No questions so far.

Have a question? Ask the digitec Community.


What's your question to the Community?

The Community terms and conditions apply.
If you have any questions about your order, please contact the Customer service.

Product ratings

Your rating

To what extent does the product meet your expectations?

LANCOM L-322agn LANCOM L-322agn