You're not connected to the Internet.
HighPoint RocketRaid 840A Actual product image
CHF 371.–instead of 670.–1

HighPoint RocketRaid 840A

Specifications

Key specifications

Number of ports4

General information

Manufacturer HighPoint
Product type Storage controllers
Item number6065518
Manufacturer no.RR840A
External links Manufacturer's site (de)

Controller properties

Hardware interface
PCI-E x8
,
PCI Express 3.0
Expansion card form factor
low profile
i

low profile

In computer technology, a "low profile PCI card" is a form factor for PCI or PCIe plug-in cards that is used in certain housings with limited space.

More information...

,
Standard
i

Standard

The standard form factor for expansion cards is the common standard that is being used in conventional deskotp PCs.

Number of ports
i

Number of ports

Maximum number of ports that can be used simultaneously.

4
RAID configuration
0
i

0

(block-level striping without parity or mirroring) has no (or zero) redundancy. It provides improved performance and additional storage but no fault tolerance.

More information...

,
1
i

1

(mirroring without parity or striping), data are written identically to two drives, thereby producing a "mirrored set"; the read request is serviced by either of the two drives containing the requested data, whichever one involves least seek time plus rotational latency.

More information...

,
5
i

5

(block-level striping with distributed parity) distributes parity along with the data and requires all drives but one to be present to operate; the array is not destroyed by a single drive failure.

More information...

,
c
i

c

A RAID-60 composite consists of a RAID-0 array that combines several RAID 6. This requires at least two controllers with four hard disks each, i.e. a total of eight hard disks. In principle, the differences between RAID 5 and RAID 6 are highly scaled to the differences between RAID 50 and RAID 60: throughput is lower, while data security is higher. The simultaneous failure of any two drives is possible at any time without data loss; further failures are only uncritical if a maximum of two drives per striped RAID 6 are affected.

More information...

,
10
i

10

A RAID 10 group is a RAID 0 over several RAID 1, combining the characteristics of both RAIDs: security and increased read/write speed.
A RAID 10 network requires at least four hard disks.

More information...

,
JBOD
i

JBOD

JBOD means Just a Bunch of Disks. JBOD lacks redundancy, so it is not a RAID system, it is just an array of independent disks.

More information...

,
50
i

50

A RAID 50 array consists of a RAID 0 array consisting of several striped RAID 5.
A RAID-50 network requires at least six hard disks, for example two RAID-5 controllers each with three disks per controller connected together with a software stripe RAID 0.
A RAID-50 network is used in databases where write throughput and redundancy are paramount.

More information...

hot plugging
Yes
Native Command Queuing
Yes

Internal interfaces

S-ATA III
i

S-ATA III

Serial ATA (SATA) is a computer bus interface for connecting host bus adapters to mass storage devices such as hard disk drives and optical drives. Serial ATA 3 can transfer up to 6 Gbit/s.

More information...

16 x

Delivery contents

Delivery contents
Low Profile Aperture

Product dimensions

Length
151.60 mm
Width
68 mm

Please click directly on the incorrect data to access the registration form.

Alternatively, you can register a generic error report (wrong picture, unsuitable accessories, etc.)

Cancel

Report incorrect data here. The specifications may also include unverified machine translations. Thank you for reporting translation errors to translations@digitecgalaxus.ch.

Correction suggestion

Comment

Report incorrect data here. The specifications may also include unverified machine translations. Thank you for reporting translation errors to translations@digitecgalaxus.ch.

Downloads

Technical data sheet | 1004.74 KB | English

Returns and warranty

Dead on arrival (DOA) 5 Days Bring-in
Warranty 24 month Bring-in
30-day right of return
i

30-day right of return

Unfortunately, we cannot accept a product if it is damaged, incomplete or missing its original packaging.

Returns and warranty

Please use our simplified returns and warranty process to return a product or register a warranty case. Returns and warranty

Please use our simplified process, which shows the correct warranty period and takes into account any warranty extensions you have purchased. This ensures that your return or case can be processed as quickly and easily as possible.

Availability

Mail delivery

Expected delivery time: approx. 10 – 12 days
Currently 2 piece(s) in stock at the supplier

Collection

All locations

Expected delivery time: approx. 10 – 12 days
Currently 2 piece(s) in stock at the supplier

If ordered immediately. Information subject to change.

Questions about this product

No questions so far.

Have a question? Ask the digitec Community.


What's your question to the Community?

The Community terms and conditions apply.
If you have any questions about your order, please contact the Customer service.

Product ratings

Your rating

To what extent does the product meet your expectations?

HighPoint RocketRaid 840A HighPoint RocketRaid 840A