Product details
Powerful S.BUS2 Brushless Digital Servo with metal gear in LowProfile design. The servo is mainly used in RC cars as a fast steering servo for EP On- & OffRoad RC cars.
Advantages of brushless motor technology:
- 30% shorter reaction time
- Better acceleration
- More resistant to vibration and impact
- High efficiency, thus lower motor heating
- No carbon brush wear, thus 5-fold motor service life
- Special gear with maximum backlash freedom
- Cobalt Samarium Motor Magnets
- Highest resolution
- Same power consumption as conventional digital servos
Programmable through S.BUS2 technology! Of course, all S.BUS2 servos can be connected to conventional receivers with PWM modulation. Servos can be addressed in various ways:
1. via the S.BUS receiver
2. with the handy programmer SBC-1
3. via the PC-Link software with the USB adapter CIU-2
4. at the S.BUS connection of the transmitter
The following parameters can be configured:
- S.BUS channel assignment
- servo reversal
- Servotype (Normal / retractable)
- Soft start (On / Off)
- Mode selection in case of signal failure Hold or Free
- Soft servo run (on / off)
- Servo position (servo tester)
- Servo center adjustment +/- 300 µs (approx. 30 degrees)
- Servo speed, 0.39...9 seconds per 45 degrees.
- Deadband setting (dead band)
- Servo travel adjustment left and right separated, approx. 50...175%
- starting force
- attenuation
- holding force
- ID storage
Technical data:
Control: BLS (Brushless)
Ball bearing: 2
Gearbox: Metal
length ca: 40,5 mm
width ca: 20 mm
height ca: 25,4 mm
Weight approx: 41 g
Input voltage: 4.8 - 7.4 Volt
Actuating force at 4.8 V approx: 94 Ncm
Actuating time at 4.8 V ca: 0.075 sec/45°
Actuating force at 6 V approx: 102 Ncm
Actuating time at 6 V approx: 0.068 sec/45°
Actuating force at 7.4 V approx: 1100 Ncm
Actuating time at 7.4 V ca: 0.060 sec/45°
Hint:
only for electric 1:10 Cars
- 30% shorter reaction time
- Better acceleration
- More resistant to vibration and impact
- High efficiency, thus lower motor heating
- No carbon brush wear, thus 5-fold motor service life
- Special gear with maximum backlash freedom
- Cobalt Samarium Motor Magnets
- Highest resolution
- Same power consumption as conventional digital servos
Programmable through S.BUS2 technology! Of course, all S.BUS2 servos can be connected to conventional receivers with PWM modulation. Servos can be addressed in various ways:
1. via the S.BUS receiver
2. with the handy programmer SBC-1
3. via the PC-Link software with the USB adapter CIU-2
4. at the S.BUS connection of the transmitter
The following parameters can be configured:
- S.BUS channel assignment
- servo reversal
- Servotype (Normal / retractable)
- Soft start (On / Off)
- Mode selection in case of signal failure Hold or Free
- Soft servo run (on / off)
- Servo position (servo tester)
- Servo center adjustment +/- 300 µs (approx. 30 degrees)
- Servo speed, 0.39...9 seconds per 45 degrees.
- Deadband setting (dead band)
- Servo travel adjustment left and right separated, approx. 50...175%
- starting force
- attenuation
- holding force
- ID storage
Technical data:
Control: BLS (Brushless)
Ball bearing: 2
Gearbox: Metal
length ca: 40,5 mm
width ca: 20 mm
height ca: 25,4 mm
Weight approx: 41 g
Input voltage: 4.8 - 7.4 Volt
Actuating force at 4.8 V approx: 94 Ncm
Actuating time at 4.8 V ca: 0.075 sec/45°
Actuating force at 6 V approx: 102 Ncm
Actuating time at 6 V approx: 0.068 sec/45°
Actuating force at 7.4 V approx: 1100 Ncm
Actuating time at 7.4 V ca: 0.060 sec/45°
Hint:
only for electric 1:10 Cars
| servotype | Standard servo |
| Servo Technology | Digital |
| moment of force | 9.20 kg/cm |
| Servo speed | 0.10 s |
| Item number | 5724315 |
| Manufacturer | |
| Category | |
| Manufacturer no. | 05102616-3 |
| Release date | 2/27/2019 |
| Sales rank in Category RC servos | |
| Maximum order quantity | 4 |
| Colour group | Black |
| Specific material description | Metal, Plastic |
| servotype | Standard servo |
| Servo Technology | Digital |
| moment of force | 9.20 kg/cm |
| Servo speed | 0.10 s |
| Engine type | Electric motor |
| Bearing type | Double ball bearing |
| Scope of delivery | Servo |
| Length | 4.05 cm |
| Width | 2 cm |
| Height | 2.54 cm |
| Weight | 41 g |
| Length | 8.40 cm |
| Width | 6.30 cm |
| Height | 3.50 cm |
| Weight | 80 g |
Specifications may include unverified machine translations.
14-day right of returnReturn policy
24 Months Bring-in WarrantyWarranty provisions
2 additional offers