You're not connected to the Internet.
CHF 99.90

Arduino GSM Shield 2 (integrated Antenna)

The Arduino GSM Shield connects your Arduino to the internet using the GPRS wireless network. Just plug this module onto your Arduino board, plug in a SIM card from an operator offering GPRS...
Art-Nr 5998054
 approx. 5-7 days Currently > 5 piece(s) in stock at the supplier

Availability

  • approx. 5-7 days
    Currently > 5 piece(s) in stock at the supplier

If ordered immediately.
Information subject to change.

View details

No ratings have been submitted yet for this product.

Rate this product

Description

The Arduino GSM Shield 2 connects your Arduino to the internet using
the GPRS wireless network. Just plug this module onto your Arduino
board, plug in a SIM card from an operator offering GPRS coverage and
follow a few simple instructions to start controlling your world
through the internet. You can also make/receive voice calls (you will
need an external speaker and microphone circuit) and send/receive SMS
messages.

As always with Arduino, every element of the platform - hardware,
software and documentation - is freely available and open-source. This
means you can learn exactly how it's made and use its design as the
starting point for your own circuits. Hundreds of thousands of Arduino
boards are already fueling people's creativity all over the world,
everyday. Join us now, Arduino is you!

* Requires and Arduino board (not included)
* Operating voltage 5V (supplied from the Arduino Board)
* Connection with Arduino Uno on pins 2, 3 (Software Serial) and 7
(reset).See these notes [1] for working with a Mega, Mega ADK, or
Leonardo.

Description

The Arduino GSM Shield allows an Arduino board to connect to the
internet, make/receive voice calls and send/receive SMS messages. The
shield uses a radio modem M10 by Quectel (datasheet [2]). It is
possible to communicate with the board using AT commands [3]. The GSM
library [4] has a large number of methods for communication with the
shield.

The shield uses digital pins 2 and 3 for software serial communication
with the M10. Pin 2 is connected to the M10's TX pin and pin 3 to its
RX pin. See these notes [5] for working with an Arduino Mega, Mega
ADK, or Leonardo. The modem's PWRKEY pin is connected to Arduino pin
7.

The M10 is a Quad-band GSM/GPRS modem that works at frequencies
GSM850MHz, GSM900MHz, DCS1800MHz and PCS1900MHz. It supports TCP/UDP
and HTTP protocols through a GPRS connection. GPRS data downlink and
uplink transfer speed maximum is 85.6 kbps.

To interface with the cellular network, the board requires a SIM card
provided by a network operator. See the getting started page [6] for
additional information on SIM usage.

The most recent revision of the board uses the 1.0 pinout on rev 3 of
the Arduino Uno board.

You may use any SIM that works on a network in your area (Orange,
Swisscom, Sunrise.....).

Links:

* getting started with the GSM shield [7]
* GSM library reference [8].
* Product Information @ Arduino:
http://arduino.cc/en/Main/ArduinoGSMShield [9]

Links:
------
[1] http://arduino.cc/en/Guide/GSMShieldLeonardoMega
[2] http://arduino.cc/en/uploads/Main/Quectel_M10_datasheet.pdf
[3] http://arduino.cc/en/uploads/Main/Quectel_M10_AT_commands.pdf
[4] http://arduino.cc/en/Reference/GSM
[5] http://arduino.cc/en/Guide/GSMShieldLeonardoMega
[6] http://arduino.cc/en/Guide/ArduinoGSMShield#toc4
[7] http://arduino.cc/en/Guide/ArduinoGSMShield
[8] http://arduino.cc/en/Reference/GSM
[9] http://arduino.cc/en/Main/ArduinoGSMShield
more

Specifications

Click 'show more' to display specifications.

General information

Manufacturer Arduino
Product type Electronics kit
Item number5998054
Manufacturer no.A000105

Please click directly on the incorrect data to access the registration form.

Alternatively, you can register a generic error-report (wrong picture, unsuitable accessories, etc.)

Cancel

Report incorrect data

Correction suggestion

Comment

Report incorrect data

If you wish to learn more about this product, please visit the manufacturer's website or contact us: digitec@digitec.ch

Warranty & right to return

Warranty 24 month Bring-in

Limited right of return

Warranty and return

Please use our simplified returns and warranty process to return a product or register a warranty case. Returns and warranty

Please use our simplified warranty process to view the warranty period as well as any warranty extensions you may have purchased. This will ensure that your return or warranty case is processed quickly and effectively.

Availability

Mail delivery

 Expected delivery time: approx. 5-7 days
Currently > 5 piece(s) in stock at the supplier

Collection

All locations

 Expected delivery time: approx. 5-7 days
Currently > 5 piece(s) in stock at the supplier

If ordered immediately.
Information subject to change.

Customer questions and answers

No questions so far.

Do you have a question? Ask the digitec community.

Ask a question

Ask other customers about product properties, performance or use.

Customer ratings

This product has not yet been rated.

Have you tested this product? Share your opinion with the digitec community.

(0)
Rate product
Arduino GSM Shield 2 (integrated Antenna) Arduino GSM Shield 2 (integrated Antenna)