Arduino ABX00021 - Uno WiFi REV2

Arduino Uno Wi-Fi REV2

Add Wi-Fi to your devices with the Arduino Uno Wi-Fi. Essentially, it is an Arduino Uno Rev3 with a bit more power: it comes with a brand new 8-bit microprocessor from Microchip and an integrated IMU (Inertial Measurement Unit). The Wi-Fi connection is secured with the new ECC608 crypto chip accelerator.

When you add this board to a device, you can connect it to a Wi-Fi network using its secure ECC608 crypto chip accelerator. The Arduino Uno Wi-Fi is functionally identical to the Arduino Uno Rev3, but it features Wi-Fi and some additional enhancements. It includes a brand new 8-bit microprocessor from Microchip and has an integrated IMU (Inertial Measurement Unit).

The Wi-Fi module is a standalone SoC with an integrated TCP/IP protocol stack that allows access to a Wi-Fi network or can function as an access point.

The Arduino Uno Wi-Fi has 14 digital input/output pins - 5 of which can be used as PWM outputs, while pin 11 is not PWM, as with the UNO Rev3 - 6 analog inputs, a USB port, a power jack, an ICSP header, and a reset button. It includes everything needed to support the microcontroller. Simply connect it to a computer with a USB cable or power it through an adapter or battery to get started.

• Microcontroller: ATMEGA4809
• Operating Voltage: 5 V
• Input Voltage (recommended): 7 - 12 V
• Input Voltage (limit): 6 - 12 V
• Digital I/O Pins: 14 - 5 provide PWM output
• PWM Digital I/O Pins: 5
• Analog Input Pins: 6
• DC per I/O Pin: 20 mA
• DC for 3.3 V Pin: 50 mA
• Flash Memory: 48 KB (ATMEGA4809)
• SRAM: 6,144 B (ATMEGA4809)
• EEPROM: 256 Bytes (ATMEGA4809)
• Clock Frequency: 16 MHz
• Integrated LEDs: 25
• Length: 68.6 mm
• Width: 53.4 mm
• Weight: 25 g.